new! FD2 SeriesBack-Lit High-Intensity Flat Diffuse-Dome Lights The new FD2 Series is an updated version of the older FD Series Back-Lit LED Flat Dome Series. FD2 Series Back-lit Flat Diffuse Lights provide a space saving design for the illumination of highly reflective objects. Two aperture (lens view hole) diameters are available to accommodate various […]
FX SeriesEdge-Lit Flat Diffuse Lights Edge-lit Flat Diffuse Lights provide a space saving design for the illumination of highly reflective objects, providing “cloudy day” diffuse illumination similar to a that of a much larger reflective dome light. In addition, edge LED illumination enables the FX Series to be even thinner than the back-lit FD Series.
new! BX2 xxyy SeriesEdge-Illuminated Backlights The BX series of Edge-lit Backlights are characterized by their high brightness and low heat output. Since the LED’s are located along the edges of the backlight, the surface of the light runs cooler than that of a back-lit light. This makes the BX Series popular for biological applications, as
Backlights Back Lighting provides an area of uniform illumination, oriented behind the object of interest, primarily for creating a part silhouette of instant contrast between dark and light. Back Lighting is most useful for edge detection, part location/orientation or presence/absence, hole detection and object gauging. Linear back lights can also be deployed behind
BL2 SeriesBack-Illuminated Standard & Collimated Super High-Intensity Backlights The BL2 Series provides a highly uniform and high intensity, diffuse backlight source, primarily used for creating object silhouettes of high contrast or imaging through semi-translucent materials. BL2 Backlights are pre-engineered for scalability, allowing for size configurations in 1″ increments up to 46″ in length and width.
Diffuse “Cloudy Day” Illumination Machine Vision Diffuse Dome lights provide diffuse “cloudy-day illumination”. Internal reflected light provides non-directional soft illumination that is free of shadowing. This effect is well suited for illuminating highly specular-reflective objects at close working distances. The inside diameter of the light needs to be roughly 50% oversized with respect to
DCS-MP Manual Intensity Control Detented, 30 position potentiometer for repeatable dimming with cable inline controllers. Built in DIN-rail or panel mounting feature. Flip up cover for potentiometer to prevent accidental adjustments. Spring clamp wiring terminal for vibration proof installation. NEW M12 selector switch for use with iCS 2 (IC) and iCS 3 (I3) M12-based
PS24-TL 24 Volt Power Supply Universal input switching supply. 24v regulated current DC – runs on 110-220v AC. Power indicator light. Tinned leads; marked negative/positive with wire nuts for easy connection. SPECIFICATIONS MECHANICAL PART NUMBER INFO DOWNLOADS Input Power 90 VAC to 264 VAC universal; AC input frequency ; 47 Hz to 60 Hz Output
MP-ICS Manual Intensity Control The MPS-ICS is provides a 0-10V analog signal to control the intensity of Advanced Illumination lights that have the 0-10V analog input line for controlling intensity. 0 – 100% intensity control For use with lights built with an ICS 2 after 3/1/2012 NOT COMPATIBLE with LLI37, BLI38, LLI67, and
BL245 Series UltraSeal IP69 Backlights Built for extreme environments, these IP69K-certified lights are specifically engineered to withstand everything from prolonged liquid immersion to high-pressure steam cleaning. A Crevice-free design with smooth-bodied surfaces diminishes the chance of material buildup while improving ease of cleaning. A Proprietary nickel finish vastly improves corrosion protection and is