EXPLOSION-PROOF ENCLOSURES

APG Explosion-Proof Enclosures isolate the Camera and associated electronics from a potentially explosive environment. as an ignition sources in explosive environments. This series Created for upright cameras, inline cameras, and small light sources.

Explosion proof enclosure

C2

The C2 enclosure offers compliance with NEC Class I, Groups B, C and D and Class II, Groups E, F and G. These Classifications and Groups are covered in Article 500 of the National Electrical Code. The enclosure is also NEMA 4X rated, allowing use in a salt-water washdown environment.

The C2 Series will accommodate larger diameter cameras and ring lights, and includes two 3/4″ NPT tapped holes for conduit attachment. Additional conduit entry can be added if factory instructions are followed.

INTERNAL DIMENSIONS

Window Diameter: 67mm 

Enclosure Diameter: 89mm

Enclosure Length: 156 mm

 

  • Compliance with NEC Class I, Div 1 & 2 Groups B, C & D, Class II, Div 1 & 2 Groups E, F & G, Class III

  • UL Classified

  • CSA Certified – Standard C2 No. 30-M1984

  • CENELEC approval

  • NEMA 3, 4X, 7 & 9

  • Cast aluminum construction

  • Two 3/4″ NPT fittings for cable conduit

 

L4

The L4 enclosure will accommodate a maximum lens or ring light diameter of 3.4″ and a total lens/camera height of approximately 4.6″. Window diameter is 5.25″.

The internal camera mount allows the camera to be spaced up to 1.5″ closer to the viewport to accommodate shorter, wide angle lenses, or to use a ring light.

The L4 enclosure includes a 1″ NPT tapped hole for conduit attachment. Additional conduit entries can be added.

The enclosure offers compliance with NEC Class I, Groups B, C and D and Class II, Groups E, F and G is covered under UL Listing 886. These Classifications and Groups are covered in Article 500 of the National Electrical Code. The enclosure is also NEMA 4X rated, allowing use in a salt water washdown environment.

Shopping Cart
Scroll to Top