VZ-3MU-M 56 H

Ultra-Compact Cost-Effective CMOS Camera

  • GigE Interface

  • Power-Over-Ethernet (POE)

  • SONY IMX265 CMOS Image Sensor

  • 3.45 um Pixels

SPECIFICATIONS

MODEL VQ-3MG2-M 38 H
Horizontal Pixels 2048
Vertical Pixels 1536
Frame Rate 38 frames/sec
Interface Gigabit Ethernet (GigE)
COLOR or Monochrome Monochrome
Image Sensor SONY IMX265
Pixel Size 3.45 um
Electronic Shutter GLOBAL
Optics Format 1/1.8 inch
Image Sensor Diagonal 8.832 mm
Lens Mount C-Mount
Pixel Output Formats Mono 8 / Mono 10
Trigger Synchronization Free-Run, Timed, Trigger Width

ELECTRICAL

Power Over Ethernet (POE) Standard IEEE 802.3af standard
Alternative External Power 12 ~ 24 VDC (GPIO-8P20 Cable Recommended )

MECHANICAL

Length 52.0 mm
Width 28.0 mm
Height 20.0 mm

ENVIRONMENTAL

Operating Ambient Temperature Range -5℃ ~ 40℃
Storage Temperature Range -40℃ ~ 70℃
Compliance CE, FCC, KC

FEATURES

VQ Series Features
  • Resolution from VGA up to 20 MP
  • Power over Ethernet with 1 Gbps interface
  • Maximum 100 meter cable lengths
  • Compact size with C-mount and CS-mount adapter
  • Built-in frame buffer and auto exposure control
  • Stream Hold and Inter-Packet Delay
  • Camera Image Memory: 64 MB
  • Field Upgradeable Firmware
  • Pixel Defect Correction (Binning Mode: 2×2, 4×4)

 

OPTICS INFO

OPTICS PARAMETERS






Horizontal PhotoActive Area (PAA h) 7.066 mm
Vertical PhotoActive Area (PAA v) 5.299 mm
Diagonal PhotoActive Area (PAA diag) 8.832 mm
Image Sensor Resolution 144.9 line pairs/mm
Rear Flange Distance 17.526 mm

 

MECHANICAL

VQ SERIES MECHANICAL DRAWING

VQ Series Mech Dwg 400_1600G2_xMG@
VQ Series Mechanical Drawing

I/O

GPIO connector as seen from rear VQ GigE series view. Pin colors correspond to GPIO-8P20 cable from Vieworks.

Pin Number Pin Description
1 (Red) VAUX (12-24V DC Power Input)
2 (Brown) Non-isolated bi-directional GPIO channel (Line 2)
3 (Orange) VDD GPIO (2.5V Power Output) (Line 4)
4 (Brown) Non-isolated bi-directional GPIO channel (Line 3)
5 (Black) GND (Camera GND)
6 (Blue) OPTO GND (Opto-isolated Reference)
7 (White) OPTO OUT (Opto-isolated Output) (Line 1)
8 (Green) OPTO IN (Opto-isolated Input) (Line 0)

DOWNLOADS

VQ SERIES DOWNLOADS

VQ Series Datasheet
VQ Camera Selection Guide
User_Manual_VQ Series GigE IMX V1.1 EN

 

Shopping Cart
Scroll to Top