VZ-5MG-C 23 C00

VZ-5MG-C 23 C00

5 MegaPixel COLOR CMOS Camera

  • 2,592 x 1,944 Pixels at 23 f/s

  • GigE Interface with Power-Over-Ethernet (POE)

  • AR0521 CMOS Image Sensor

  • 2.2 um Square Pixels

Add to quote

SPECIFICATIONS

MODEL VZ-5MG-C 23 C00
Horizontal Pixels 2592
Vertical Pixels 1944
Frame Rate 23 frames/sec
Interface Gigabit Ethernet (GigE)
COLOR or Monochrome COLOR
Image Sensor ON Semi AR0521
Pixel Size 2.20 um
Electronic Shutter Rolling
Optics Format 1/2.5 inch
Image Sensor Diagonal 7.128 mm
Lens Mount C-Mount
Pixel Output Formats Bayer RG8, Bayer RG12
Trigger Synchronization Free-Run, Timed, Trigger Width

ELECTRICAL

Power Over Ethernet (POE) Standard IEEE 802.3af standard
Alternative External Power 12 ~ 24 VDC (GPIO-8P20 Cable Recommended )
Power Consumption POE: <3.75 Watts
External (Hirose): < 3 Watts

MECHANICAL

Length 57.1 mm
Width 29.0 mm
Height 29.0 mm
Mass 85 g

ENVIRONMENTAL

Operating Ambient Temperature Range 0℃ ~ 45℃
Storage Temperature Range -20℃ ~ 70℃
Compliance CE, RoHS, FCC, GigE Vision, GeniCam, KC

 

FEATURES

VZ GigE Series Features
 

  • Power over Ethernet (IEEE802.3af compliant)

  • Programmable ROI, increased frame rate with partial scan

  • Programmable LUTs and storable user sets

  • Four acquisition controls: Single frame, Continuous, Software trigger, External trigger

  • Adjustable Gamma and Sharpness for optimizing the brightness and sharpness of images

  • Supports “Remove Parameter Limits” to expand the range of exposure, gain, white balance, etc.

  • Two exposure time modes: Standard / Minimal

OPTICS INFO

OPTICS PARAMETERS






 Horizontal PhotoActive Area (PAA h) 5.702 mm
Vertical PhotoActive Area (PAA v) 4.277 mm
Diagonal PhotoActive Area (PAA diag) 7.128 mm
Image Sensor Resolution 227 line pairs/mm
Rear Flange Distance 17.526 mm

 

MECHANICAL

VZ SERIES GIGE MECHANICAL DRAWING

 

 

I/O

VZ GigE Series I/O Pinout

The VZ Series GigE camera I/O Port is an 8-pin Hirose Connector: p/n HR25-7TR-8PA(73)
The Corresponding Cable Connector Plug p/n: HR25-7TP-8S

Pin Number DESIGNATION FUNCTION
1 Line0+ Opto-isolated input+
2 Ground GND & GPIO GND
3 Line0- Opto-isolated input-
4 POWER_IN External Power Input (+12 VDC ~ +24 VDC)
5 Line2 GPO input/output
6 Line3 GPO input/output
7 Line1- Opto-isolated input-
8 Line1+ Opto-isolated input+

 

DOWNLOADS

VZ SERIES GigE DOWNLOADS

VZ-5MG-M/C 23 C00 Datasheet
VZ Camera Selection Leaflet
VZ Series GigE User Manual

Shopping Cart
Scroll to Top