VZ-2MG-M 41 H

VZ-2MG-M 41 H

2.3 MegaPixel Monochrome CMOS Camera

  • 1920 x 1200 Pixels at 41 f/s

  • GigE Interface with Power-Over-Ethernet (POE)

  • Sony IMX249 Pregius CMOS Image Sensor

  • Large 5.86 um Square Pixels

Add to quote

SPECIFICATIONS

MODEL VZ-2MG-M 41 H
Horizontal Pixels 1920
Vertical Pixels 1200
Frame Rate 41 frames/sec
Interface Gigabit Ethernet (GigE)
COLOR or Monochrome Monochrome
Image Sensor SONY IMX249
Pixel Size 5.86 um
Electronic Shutter GLOBAL
Optics Format 1/1.2 inch
Image Sensor Diagonal 13.268 mm
Lens Mount C-Mount
Pixel Output Formats Mono8 / Mono12
Trigger Synchronization Free-Run, Timed, Trigger Width

ELECTRICAL

Power Over Ethernet (POE) Standard IEEE 802.3af standard
Alternative External Power 12 ~ 24 VDC (GPIO-8P20 Cable Recommended )
Power Consumption POE: <3.75 Watts
External (Hirose): < 3 Watts

MECHANICAL

Length 57.1 mm
Width 29.0 mm
Height 29.0 mm
Mass 85 g

ENVIRONMENTAL

Operating Ambient Temperature Range 0℃ ~ 45℃
Storage Temperature Range -20℃ ~ 70℃
Compliance CE, RoHS, FCC, GigE Vision, GeniCam, KC

 

FEATURES

VZ GigE Series Features
 

  • Power over Ethernet (IEEE802.3af compliant)

  • Programmable ROI, increased frame rate with partial scan

  • Programmable LUTs and storable user sets

  • Four acquisition controls: Single frame, Continuous, Software trigger, External trigger

  • Adjustable Gamma and Sharpness for optimizing the brightness and sharpness of images

  • Supports “Remove Parameter Limits” to expand the range of exposure, gain, white balance, etc.

  • Two exposure time modes: Standard / Minimal

OPTICS INFO

OPTICS PARAMETERS






 Horizontal PhotoActive Area (PAA h) 11.251 mm
Vertical PhotoActive Area (PAA v) 7.032 mm
Diagonal PhotoActive Area (PAA diag) 13.268 mm
Image Sensor Resolution 85 line pairs/mm
Rear Flange Distance 17.526 mm

MECHANICAL

VZ SERIES GIGE MECHANICAL DRAWING

 

I/O

VZ GigE Series I/O Pinout

The VZ Series GigE camera I/O Port is an 8-pin Hirose Connector: p/n HR25-7TR-8PA(73)
The Corresponding Cable Connector Plug p/n: HR25-7TP-8S

Pin Number DESIGNATION FUNCTION
1 Line0+ Opto-isolated input+
2 Ground GND & GPIO GND
3 Line0- Opto-isolated input-
4 POWER_IN External Power Input (+12 VDC ~ +24 VDC)
5 Line2 GPO input/output
6 Line3 GPO input/output
7 Line1- Opto-isolated input-
8 Line1+ Opto-isolated input+

DOWNLOADS

VZ SERIES GigE DOWNLOADS

VZ-2MG-M/C 41 H Datasheet
VZ Camera Selection Leaflet
VZ Series GigE User Manual

 

Shopping Cart
Scroll to Top