SW-4000M-PMCL

SPECIFICATIONS

Model	SW-4000M-PMCL
Product Family	Sweep Series
Interface	USB3 Vision (PoUSB)
Image Sensor	Sony IMX250
Image Sensor Type	CMOS Pregius
COLOR or Monochrome	Monochrome
Spectral Range	Visible + NIR
Optics Format	2/3 inch
Image Sensor PhotoActive Diagonal	11.071 mm
Lens Mount	C-mount
Horizontal Pixels	2464
Vertical Pixels	2056
Total Pixels	5.07 MegaPixels
Frame Rate	74 fps
Electronic Shutter	Global
Pixel Size	3.45 µm
Pixel Depth	8/10/12 bits
Pixel Formats	Mono 10, Mono 10p, Mono 12, Mono 12p, Mono 8
Frame Synchronization	Free-run Hardware trigger Software trigger
Exposure Control	Programmable via the camera API Hardware trigger
Digital Inputs	1 Opto-Isolated Input line
General Purpose I/O (GPIO)	2 General Purpose I/O (GPIO) lines
Power Input	5.0 VDC
Power Consumption	2.8 Watts
Dimensions	42.8 mm x 29 mm x 29 mm
Operating Temperature	0 to 50°C
Mass	85 g
Standards Compliance	CE, EAC, GenICam, IP30 KC, RoHS, UL (in preparation), USB3 Vision

5-megapixel camera with 3.45-micron pixels and 2/3” optical format.
Direct replacement for cameras based on ICX625 CCD imagers.
USB3 Vision interface for plug-and-play convenience.
Monochrome output.
Temporal dark noise rating <3e-
7 µs minimum exposure time.
Single and Multi-ROI modes for flexible windowing and use of smaller optics.
Industrial grade performance with 80G shock, 10G vibration, and over 175,000 hrs. MTBF ratings.

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	8.501 mm
	Vertical PhotoActive Area (PAA v)	7.093 mm
	Diagonal PhotoActive Area (PAA diag)	11.071 mm
	Image Sensor Resolution	144.9 line pairs/mm
	Rear Flange Distance	17.526 mm

PIN	DESIGNATION	FUNCTION
1	–	Reserved. Do Not Connect.
2	Line 1	Opto-coupled I/O input line
3	–	Ground for opto-coupled I/O lines
4	Line 2	General purpose I/O (GPIO) line
5	Line 3	General purpose I/O (GPIO) line
6	–	Ground for General Purpose I/O (GPIO) lines