daA720-520um (CS-Mount)

Board-Level Monochrome CMOS Camera

  • 720 x 540 pixels @ 523 frames/sec
  • USB 3.0 Interface
  • CS-Mount Included

$ 245.00

SPECIFICATIONS

Model daA720-520um (CS-Mount)
Part Number 108724
Product Family Basler dart
Interface USB 3.0
Image Sensor Sony IMX287
COLOR or Monochrome Mono
Optics Format 1/2.9 inch
Lens Mount CS-Mount
Horizontal Pixels 720
Vertical Pixels 540
Total Pixels 0.39 MegaPixels
Frame Rate 523 Frames/sec
Electronic Shutter Global Shutter
Pixel Size 6.90 um
Pixel Depth 8/12 bits
Pixel Output Formats
Mono 12
Mono 8
Frame Synchronization Hardware Trigger
Free-Run Mode
Software Trigger
Exposure Control Programmable via the camera API
Digital Inputs 0
Digital Outputs 0
General Purpose I/O (GPIO) 4
Power Input via USB 3.0 interface
Power Consumption 1.2 Watts
Dimensions 19.9 mm x 29.3 mm x 29 mm
Operating Temperature 0 to 50 C
Mass 15 g
Standards Compliance CE, RoHS, GenICam, USB3 Vision, EAC

 

FEATURES

Chunks
  • Auto Brightness Status
  • CRC Checksum
  • Counter Value
  • Exposure Time
  • Frame ID
  • Gain
  • Line Status All
  • Timestamp
  • Timestamp Value
Color Creation and Enhancement
  • Brightness and Contrast
Event Reporting
  • Exposure End
  • Frame Buffer Overrun
  • Frame Start
  • Frame Trigger Missed
  • Overrun
  • Temperature Status Changed
  • Test
I/O Control
  • Input Filter
  • Line Connection
  • Two-Wire Interface
Image Acquisition Control
  • Acquisition Frame Rate
  • Acquisition Mode
  • Acquisition Start, Stop, and Abort
  • Acquisition Status
  • Exposure Active Trigger
  • Exposure End Trigger
  • Exposure Start Delay
  • Exposure Start Trigger
  • Frame Active Trigger
  • Frame Burst Active Trigger
  • Frame Burst End Trigger
  • Frame Burst Start Trigger
  • Frame End Trigger
  • Frame Start Trigger
  • High Speed Burst Mode
  • Sensor Readout Time
  • Trigger Delay
  • Triggered by Hardware
  • Triggered by Software
Line Source Signals
  • Counter Active
  • Exposure Active
  • Frame Burst Active
  • Frame Burst Trigger Wait
  • Frame Trigger Wait
  • Timer 1 Active, Timer 2 Active
Miscellaneous
  • Device Information Parameters
  • Device Temperature
  • Sensor Bit Depth
  • Temperature State
  • User Sets (Configuration Sets)
  • User-Defined Values
PGI
  • Denoising
  • Improved Sharpness
Pixel Formats
  • Mono 12
  • Mono 12p
  • Mono 8
Standard Features
  • Auto Function Profile
  • Binning
  • Black Level
  • Center X and Center Y
  • Counter
  • Digital Shift
  • Exposure Auto
  • Exposure Mode: Timed
  • Exposure Mode: Trigger Controlled
  • Exposure Mode: Trigger Width
  • Exposure Time
  • Gain
  • Gain Auto
  • Gamma Correction
  • Image ROI (Region of Interest)
  • Reverse X (Horizontal Mirroring)
  • Reverse Y (Vertical Mirroring)
  • Test Patterns
  • Timer

OPTICS

OPTICS PARAMETERS

PAA H 4.968 mm
PAA V 3.726 mm
PAA diagonal 6.210 mm
SPATIAL RESOLUTION 73 lp/mm

MECHANICAL & I/O Pinout

Case Type CS Mount
Board Size (Thickness x W x H) 19.9 mm x 29.3 mm x 29 mm
Mass 15 g

Connector Locations 

Camera Connectors and LED Indicator Camera USB 3.0 Connector

I/O Connector Pinout

I/O Connector
Pin Numbering for the I/O Connector		 PIN LABLE FUNCTION
1 – 3.3 VDC, 20 mA Maximum (CAUTION: Do not apply power to this pin)
2 – Ground
3 Line 1 General Purpose I/O (GPIO) line PRESET: INPUT LINE
4 Line 2 General Purpose I/O (GPIO) line  PRESET: INPUT LINE
5 – Not Connected
6 – Not Connected
Basler dart USB3 CS-Mount Gen2 v02

 

Basler-dart-USB3-CS-Mount-Gen2-v02.pdf

 

DOWNLOADS

Basler Dart USB 3.0 Manual.pdf
Basler-dart-USB3-CS-Mount-Gen2-v02.pdf
Shopping Cart
Scroll to Top