TX Series Back Lights
The MetaPhase TX Series of backlights offer a compact cost-effective solution for machine vision applications. An efficient layout provides a photoactive area that extends to within 10 mm of the edges of the unit.
The TX Series is available in a wide variety of colors, including WHITE, Red, Green & Blue as well as multichannel versions that provide RGW and RGW-White option. Infrared version are available (850 or 940 nm.)
The TX Series features a robust IP50-rated mechanical housing designed for factory environments.
AVAILABLE WAVELENGTHS
| Supply Voltage | 24VDC +/-5% |
| 0-10V Intensity Control Input | 0.70 mA Minimum Current |
| Default DC Operation | Output enabled with floating trigger |
| 0-10V Dimming Control | 5% to 100% output light intensity, 1mA source current at 10VDC |
| Trigger Input | NPN, 1kHz max trigger rate, Ground (0-1VDC) disables output, .5mA sink current |
| LED Layout | Full Array |
| Ambient Temperature | 0 to 40°C |
| Housing | Clear Anodized Aluminium |
| Mounting | (2) T-nuts minimum per side, pre-installed |
| Ingress Rating | IP50 |
| Outside Dimensions | OD equals Active Area + 20mm (see drawing) |
| Lifetime Expectancy | 75,000 hours (except UV) |
Features
4-sided T-slot based aluminum extrusion with supplied T-nuts
25mm housing height to accommodate low-profile installations
10mm wide perimeter maximizes active area relative to housing footprint
Included T-slot L-brackets accommodates both front and back mounting
Full-array high-density LEDs
High-efficiency dimmable constant-current driver built-in
Bulkhead 5-pin M12 A-Code connector(s) for DC version, 4-pin M12 T-Code for ULC version
Optional polarizers & diffusers, field-replaceable by removing one side
Available in standard & collimating
Available in R, G, B, W, and IR850 or combination up to four colors
Standard sizes from 50mm to 400mm. Contact Metaphase for sizes up to 1000mm by 1000mm
TX SERIES Part Number Guide
| PART NUMBER KEY | ||||||||||
FAMILY | – | Active AreaStandard Sizes* | – | Wavelength | – | Drive | – | Polarizer | – | CONNECTOR |
TXBL1A | XXXX | – | XXXXXX | – | XX | – | XXXXX | – | XXX | |
* Contact factory for sizes up to 4040 (1000 x 1000 mm) | W (White 5700K) R (Red 630nm) G (Green 530nm) B (Blue 470nm) IR850 (Infrared 850nm RGB (630nm, 520nm, 470nm) RGBW (630nm, 520nm, 470nm, 5700K) WIR850 (850nm, 5700K) WIR940 (940nm, 5700K) | DC (24VDC) U (Universal, LED Controller, ULC) | Blank if no polarizer POL0 POL90 | Blank if LSR (Long-side right) | ||||||
Example 1: TXBL1A-0412-W-DC | ||||||||||
TXBL-DC SERIES M12A CONNECTOR PINOUT
| TXBL: 50 x 50 mm to 400 x 400 mm |
| TXBL-DC Datasheet |  | |||
| TXBL Drawings | |  |  |  |