SP-45000M-CXP4

SP-45000M-CXP4

45 MPixel Monochrome CoaXpress Camera

Square Format: 8192 x 5460 Pixels
Small 3.2 μm Square Pixels
Up to 65 fps at full resolution
CoaXPress-4-Lanes (PoCXP)

$ 8,300.00

SPECIFICATIONS

Model	SP-45000M-CXP4
Product Family	Spark Series
Interface	CXP-6 CoaXPress-4-Lanes (PoCXP)
Image Sensor	OnSemi XSG 45000
Horizontal Pixels	8,192
Vertical Pixels	5,460
Total Pixels	45 MegaPixels
Frame Rate	52 f/s
COLOR or Monochrome	Monochrome
Spectral Range	Visible + NIR
Optics Format	35mm Full Frame
Image Sensor PhotoActive Diagonal	31.503 mm
Pixel Size	3.20 μm
Lens Mount	F-mount or M42
Electronic Shutter	Global
Pixel Formats	Monochrome: 8/10/12-bits
Frame Synchronization	Free-run Hardware trigger Software trigger
Digital Inputs	1 Opto-Isolated Input, 1 TTL Input
General Purpose I/O (GPIO)	1 Opto-Isolated Output, 1 TTL Output

ELECTRICAL

Power Input (12-pin Hirose)

PoCXP

+10V to +25V DC. 12.5 W typical @ +12 V
PoCXP Not Supported.

Power Consumption

12.5 Watts

MECHANICAL

Case Type	Metal Shielded Box
Case Size (L x W x H)	62 mm x 62 mm x 84.2 mm (excluding connectors)
Mass	330 g
Vibration Tolerance	10 G (20 Hz to 200 Hz XYZ directions)
Shock Tolerance	80 G

STANDARDS COMPLIANCE

REGULATIONS

CE (EN61000-6-2, EN61000-6-3), FCC Part 15 Class B, RoHS/WEEE

ENVIRONMENTAL

Operating Temperature	-5°C to +45°C
Storage Temperature	-25°C to +60°C
Humidity	20% – 80% non-condensing

OVERVIEW

Ideal blend of resolution and speed

Delivering 8192 x 5460 pixels at 51 fps and 8K TV resolution at 65 fps, the SP-45000-CXP4’s combination of speed and resolution makes it ideal for flat panel inspection, sports, mapping, electronics, high-end surveillance, and many other applications where detailed analyses are required across a wide area.

Built-in functions for HDR imaging

With an exceptionally low dark noise rating (<5e-), the SP-45000-CXP4 boasts 67 dB of standard dynamic range, extendable to 73 dB by built-in linear or knee-point HDR functions for both monochrome and color models.

Frame averaging for reduced shot noise

For applications that demand the highest possible image quality, the SP-45000-CXP4 features a Frame Integration mode that can average the exposures of up to 8 sequential frames to dramatically reduce the amount of shot noise in the image.

OPTICS

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	22.528 mm
	Vertical PhotoActive Area (PAA v)	16.896 mm
	Diagonal PhotoActive Area (PAA diag)	28.160 mm
	Image Sensor Resolution	91 line pairs/mm
	F-Mount Flange Distance	46.5 mm

I/O Pinout

12-pin I/O Connector
HIROSE HR10A-10R-12P(71)

PIN	FUNCTION
1	GROUND
2	DC Power Input +10V to +25V
3	GROUND
4	N/C
5	Opto IN 1 ( – )
6	Opto IN 1 (+ )
7	Opto OUT 1 ( – )
8	Opto OUT 1 (+ )
9	TTL OUT 1
10	TTL IN 1
11	DC Power Input +10V to +25V
12	GROUND

10-pin I/O Connector
Type 3260-10S3(55) HIROSE or EQUIV.

PIN	SIGNAL	NOTE
1	TTL Out 2	Line 8
2	NC
3	TTL In 2	Line 10
4	NC
5	GND	GND
6	Lens Power	DC 9 Volts
7	RS-232C Tx	For Lens Control
8	RS-232C Tx	For Lens Control
9	GND
10	GND

DOWNLOADS

SP-45000M-CXP4 DATASHEET
SP-45000M-CXP4 Revision Note
SP-45000M-CXP4 MANUAL
SP-45000M-CXP4 MECHANICAL DRAWING (F-Mount)
SP-45000M-CXP4 MECHANICAL DRAWING (M42-Mount)
SP-45000M-CXP4 Frame Rate Calculator