TX Series Bar Lights
Demanding machine vision applications require superior illumination performance, and the TX Series of Barlights deliver impressive results.
The result is an unparalleled machine vision Barlight solution. High-performance design and an array of features and options facilitate application optimization to deliver exceptional results with maximum flexibility and minimal technical risk.
Application Type: Front light, mutispectral
Wavelength: R, G, B, W, RGB, UV365, UV395, IR850, IR940, SWIR (6 wavelengths)
Control: Standard driver allows light to be used continuous AND with follow-me strobe (8x power)
Mounting: Flexible form factor, multiple wavelengths, and variable controls provide endless application options
Footprint: 300mm length (daisy-chain up to 6); narrow footprint: 32mm wide x 49mm high
AVAILABLE WAVELENGTHS
| Supply Voltage | 24VDC +/-5% |
| 0-10V Intensity Control Input | 0.70 mA Minimum Current |
| Default DC Operation | Output enabled with floating trigger |
| 0-10V Dimming Control | 5% to 100% output light intensity, 1mA source current at 10VDC |
| Trigger Input | NPN, 1kHz max trigger rate, Ground (0-1VDC) disables output, .5mA sink current |
| LED Layout | Full Array |
| Ambient Temperature | 0 to 40°C |
| Housing | Clear Anodized Aluminium |
| Mounting | (2) T-nuts minimum per side, pre-installed |
| Ingress Rating | IP50 |
| Outside Dimensions | OD equals Active Area + 20mm (see drawing) |
| Lifetime Expectancy | 75,000 hours (except UV) |
Features
4-sided T-slot based aluminum extrusion with supplied T-nuts
25mm housing height to accommodate low-profile installations
10mm wide perimeter maximizes active area relative to housing footprint
Included T-slot L-brackets accommodates both front and back mounting
Full-array high-density LEDs
High-efficiency dimmable constant-current driver built-in
Bulkhead 5-pin M12 A-Code connector(s) for DC version, 4-pin M12 T-Code for ULC version
Optional polarizers & diffusers, field-replaceable by removing one side
Available in standard & collimating
Available in R, G, B, W, and IR850 or combination up to four colors
Standard sizes from 50mm to 400mm. Contact Metaphase for sizes up to 1000mm by 1000mm
TX SERIES Backlight Part Number Guide
| FAMILY | MODEL | – | LENGTH | – | COLOR | – | DRIVER | – | POLARIZATION | – | LENS | – | DIFFUSER |
| TXBR | XX | XX | XXXX | X | XXX | XXX | XX | ||||||
| TXBR | 1A (Single Connector) 2A (Dual Connector) | 12 (300mm) | W (White 6000K) R (Red 630nm) G (Green 530nm) B (Blue 470nm) IR850 (Infrared 850nm IR940 (IR940) IR05 (SWIR 1050) IR20 (SWIR 1200) IR30 (SWIR 1300) IR45 (SWIR 1450) IR55 (SWIR 1550) IR65 (SWIR 1650) UV36 (UV 365nm) UV39 (UV 395nm) | Blank for Default (24VDC with follow-me trigger) – U External Drive | Blank for no polarizer P0 P90 | NL (No Lens) L20 (20deg full angle) L35 (35deg full angle) L45 (45deg full angle) | Blank for Default CC (clear cover) D2 (single matte) D4 (milky) D5 (opal replacement) |
TXBL-DC SERIES M12A CONNECTOR PINOUT
| TXBL: 50 x 50 mm to 400 x 400 mm |
| TXBL-DC Datasheet |  | |||
| TXBL Drawings | |  |  |  |