SPECIFICATIONS
| Model | WA-1000D-CL |
| Product Family | Wave Series |
| Resolution | 1,024 x 2 |
| Pixel Size |
25.0 μm |
| Line Scan Rate | 39.0 kHz |
| Interface | CameraLink |
| CameraLink Clock | 53.36 MHz |
| Pixel Clock | 6.67 MHz |
| Image Sensor | Hamamatsu Photonics G10768-1024DB |
| Spectral Sensitivity | 900 nm to 1,700 nm |
| Spectral Range | 2 Bands SWIR |
| Image Sensor PhotoActive Width | 25.600 mm |
| Lens Mount | M52 Mount. (Lens Protrusion of 13mm or less) |
| Pixel Formats | 2 x 8-bit, 2 x 10-bit, 2 x 12-bit through Camera Link interface |
| Trigger Input | Trigger (Camera Link, TTL/75 Ω) |
| Sync output (open termination) |
Camera Link: LVAL – DVAL – EEN Hirose 12-pin: XEEN |
| Exposure Control | Supported (during shutter select mode) Variable range: 20.38 μs*1 (1L) to 1.995 ms Variable unit: 149.9 ns |
| Digital Inputs/Outputs | GPIO in/out via 12-pin Hirose connector |
| Connectors | CameraLink: 110226-1A0PL (x2) Hirose 12-pin: HR10A-10R-12PB(71) |
| Power Input | DC +12V-10% to +24V + 10% Typical: 520mA (No-shutter/internal, lens cap on) Max.: 600mA (No-shutter/internal, at saturation level) |
| Power Consumption | 9.84 W |
| Dimensions (H x W x L) | 90 mm (H) x 90 mm (W) x 117 mm (D) (without connector and lens mount protrusion) |
| Mass | 910 g |
| Operating Temperature | -5°C to +45°C |
| Storage Temperature | -25°C to +60°C |
| Humidity | 20 – 80% non-condensing |
| Vibration | 10G (20 Hz to 200 Hz XYZ direction) |
| Shock | 80G |
| Mass | 910 g |
| Standards Compliance | CE (EN61000-6-2, EN61000-6-3) RoHS/WEEE IEC/EN61000-4-3 FCC Part15 Class B IEC61000-4-2 Level 4 (contact discharge = 8 kV, air discharge = 15 kV) |
