RUNNER 65-70-M

High Speed Turnkey Recording System

  • High Speed Monochrome Camera 

  • 65 MegaPixels at 71 Frames/sec

  • RC-1 Controller Package

 

SPECIFICATIONS

MODEL RUNNER 65-70-M
Camera Model CYCLONE 65-70-M
Horizontal Pixels 9,344
Vertical Pixels 7,000
Total Pixels 65.41 MegaPixels
Frame Rate (Full Resolution) 71 frames/sec
Color or Monochrome Monochrome
Image Sensor Gpixel  GMAX3265
Pixel Size 3.20 um
Image Sensor PhotoActive Area 29.90 mm (h) x 22.40 mm (v) x 37.36 mm (Diagonal)  
Electronic Shutter Global
Interface CoaXPress V2.0 (4 x 12.5 Gbit/s)
Digital I/O 1 Opto-Isolated Trigger In, 1 TTL Sync Output
Lens Mount F-Mount (Option for C, G or M42 Mount)
Supply Voltage PoCXP (Power Over CoaXPress)
Power Consumption 14 Watts
Dimensions 65 mm x 65 mm x 71 mm
Mass 400 g
Operating Temperature Range 0C – 70C

RC-1 CONTROL UNIT SPECIFICATIONS

Video memory 24 GB (option for 56 GB)
Memory Architecture Ring Memory
A/D conversion 8 bits
Trigger Modes Rising or falling edge, software, manually by handtrigger, pre- and post-trigger
Trigger Input D-SUB HD 26p female, TTL
Hard Drive 1 TB SSD
Operating System Windows 10 Pro, English
Dimensiona 205 mm x 270 mm x 80 mm
Weight 1.8 kg
Power Supply  100 – 440 VAC, 50-60 HZ
Temperature Range 0 – 40C (32 – 104 F)
Interfaces HDMI, 4x USB 2.0, 4x usb3, GigE,  for trigger input
Trigger Input DSUB HD26
Delivery Scope Controller with 24 GB video memory, controller power supply with cable, TimeViewer software, Manual on USB stick, transport case

OVERVIEW

Cyclone 65-70 Camera

The Optronis Cyclone 65-70 is an Ultra High Resolution machine vision camera with high frame rate of 71 frames/sec at full 65 MegaPixel resolution .

The camera also supports Region of Interest (ROI) operation, which provides an increased frame rate by decreasing the number of pixels in a frame. For example, the Cyclone 25-150 camera can operate at 449 frames per second when the frame size is reduced to 1920 x 1080  pixels. 

The Gpixel GMAX3265 image sensor used in the camera features a full-frame GLOBAL electronic shutter, and is available in both monochrome and color versions 

Similar to all models of CamPerform-Cyclone series the CoaXPress V 2.0, operating all four  channels at 12.5 Gb/s each, for a total bandwidth of 50 Gb/s.

TimeViewer SOFTWARE

Runner systems are controlled by TimeViewer software. It is installed on the controller but also provided separately for installation on a remote PC. The software is used for single and multiple camera setups. It also integrates a tracking feature to extract trajectory data of moving objects. Video memory is configured as a ring memory to allow post-trigger operation.
TimeViewer Key features:
  • Automatic recording start by image trigger
  • Freely adjustable pre- and post-trigger
  • Object tracking
  • Preview images for simplified navigation
  • Synchronous multi-camera control
  • Export of AVI formats
  • Capture of trajectories
  • Measurement of distance, angle, speed
  • Insertion of logo and text into sequences

SETUP

The camera is connected to the controller for supplying power and data transfer.

User control in stand-alone configuration is provided via additional keyboard, mouse and monitor. For remote operation only Ethernet connection is used. Multi-camera configurations are possible also.

STAND-ALONE OPERATION

The system can be operated stand-alone by connecting keyboard, mouse and monitor. After capturing a video sequence it can be saved on the hard disk of the controller. Transfer of video data to external devices is done by using Ethernet or USB interface.

REMOTE OPERATION

Using a separate PC allows to operate Runner systems in remote mode. In this configuration video sequences are saved on the hard disk of the remote PC.

MULTIPLE CAMERA OPERATION

Multi-camera systems can be configured by connecting multiple Runner systems via Ethernet to the remote PC. CamRecord-Sprinter and CamRecord-CR cameras can also be used. Serving as an alternative to a remote PC, multi-camera systems can be controlled by one of the controllers.

MECHANICAL

Cyclone 65-70-M Mechanical Drawing
Controller-RC1 Mechanical Drawing

DOWNLOADS

RUNNER Documentation

Runner DATASHEET
Programmer Guide

CAMERA Documentation

Cyclone 65-70-M Datasheet
Cyclone 65-70-M  Manual
Cyclone 65-70-M 3D CAD STEP FILE

 

ACCESSORIES

F-Mount lens adapter
CP-FM
C-Mount lens adapter

CP-CM

G-Mount lens adapter

CP-FMG

M42x1 lens adapter

CP-M42

M42x0.75 lens adapter

CP-T2

Power supply CP70, CP90
Power supply CP80CPH4-PSA for CP70- and CP90-Series (Figure)
CPL3-PSA for CP80-Series

Pigtail cable CP70, CP90
Pigtail cable CP80

for Synch-In and Synch-Out signals
CPH6-PTC for CP70- and CP90-Series (Figure)
CPL4-PTC for CP80-Series

Programming cable CP70, CP90
Programming cable CP80

to be used for firmeware update
CPH6-USB for CP70- and CP90-Series (Figure)
CPL4-USB for CP80-Series

Shopping Cart
Scroll to Top