SPECIFICATIONS
| MODEL |
RUNNER 5-700 M |
| Camera Model |
Cyclone-5-700-M |
| Horizontal Pixels |
2,560 |
| Vertical Pixels |
1,920 |
| Total Pixels |
4.92 MegaPixels |
| Frame Rate (Full Resolution) |
693 frames/sec |
| Color or Monochrome |
Monochrome |
| Image Sensor |
Luxima Technology LUX51 |
| Pixel Size |
5.00 um |
| Image Sensor PhotoActive Area |
12.80 mm (h) x 9.60 mm (v) x 16.00 mm (Diagonal) |
| Electronic Shutter |
Global |
| Interface |
CoaXPress V2.0 (4 x 12.5 Gbit/s) |
| Digital I/O |
1 Opto-Isolated Trigger In, 1 TTL Sync Output |
| Lens Mount |
F-Mount (Option for C, G or M42 Mount) |
| Supply Voltage |
PoCXP (Power Over CoaXPress) |
| Power Consumption |
10 Watts |
| Dimensions |
65 mm x 65 mm x 71 mm |
| Mass |
400 g |
| Operating Temperature Range |
0C – 70C |
RC-1 CONTROL UNIT SPECIFICATIONS
| Video memory |
24 GB (option for 56 GB) |
| Memory Architecture |
Ring Memory |
| A/D conversion |
8 bits |
| Trigger Modes |
Rising or falling edge, software, manually by handtrigger, pre- and post-trigger |
| Trigger Input |
D-SUB HD 26p female, TTL |
| Hard Drive |
1 TB SSD |
| Operating System |
Windows 10 Pro, English |
| Dimensiona |
205 mm x 270 mm x 80 mm |
| Weight |
1.8 kg |
| Power Supply |
100 – 440 VAC, 50-60 HZ |
| Temperature Range |
0 – 40C (32 – 104 F) |
| Interfaces |
HDMI, 4x USB 2.0, 4x usb3, GigE, for trigger input |
| Trigger Input |
DSUB HD26 |
| Delivery Scope |
Controller with 24 GB video memory, controller power supply with cable, TimeViewer software, Manual on USB stick, transport case |
OVERVIEW
Camera
The Cyclone-5-700-M camera feature the high-performance Alixima LUX51 global shuttered 5-MegaPixel CMOS image sensor. The sensor is available in both monochrome and color versions. At full 5-MegaPixel Resolution the Cyclone 5-700-M camera provides up to 693 full Frames per second.
The camera is also capable of operating in Region of Interest mode, which provides for even higher frame rates. For example, the camera runs at 1,227 frames/sec when operated in HDTV (1920 x 1080) mode.
Signal processing in the Cyclone-5-700-M is optimized for low noise and high dynamic range.
.
TimeViewer SOFTWARE
Runner systems are controlled by TimeViewer software. It is installed on the controller but also provided separately for installation on a remote PC. The software is used for single and multiple camera setups. It also integrates a tracking feature to extract trajectory data of moving objects. Video memory is configured as a ring memory to allow post-trigger operation.
|
TimeViewer Key features:
- Automatic recording start by image trigger
- Freely adjustable pre- and post-trigger
- Object tracking
- Preview images for simplified navigation
- Synchronous multi-camera control
- Export of AVI formats
- Capture of trajectories
- Measurement of distance, angle, speed
- Insertion of logo and text into sequences
|
SETUP
The camera is connected to the controller for supplying power and data transfer.
User control in stand-alone configuration is provided via additional keyboard, mouse and monitor. For remote operation only Ethernet connection is used. Multi-camera configurations are possible also.
|
 |
STAND-ALONE OPERATION
The system can be operated stand-alone by connecting keyboard, mouse and monitor. After capturing a video sequence it can be saved on the hard disk of the controller. Transfer of video data to external devices is done by using Ethernet or USB interface.
|
 |
REMOTE OPERATION
Using a separate PC allows to operate Runner systems in remote mode. In this configuration video sequences are saved on the hard disk of the remote PC.
|
 |
MULTIPLE CAMERA OPERATION
Multi-camera systems can be configured by connecting multiple Runner systems via Ethernet to the remote PC. CamRecord-Sprinter and CamRecord-CR cameras can also be used. Serving as an alternative to a remote PC, multi-camera systems can be controlled by one of the controllers.
|
 |
