RUNNER 25-150-C old

Cyclone Series High Speed Camera

26 MegaPixels at 150 Frames/sec

Global Shutter
CoaXPress 2.0 Interface

SPECIFICATIONS

MODEL CYCLONE 25-150-C
Horizontal Pixels 5,120
Vertical Pixels 5,120
Total Pixels 26.21 MegaPixels
Frame Rate (Full Resolution) 150 frames/sec
Color or Monochrome COLOR
Image Sensor Gpixel  GMAX0505
Pixel Size 2.50 um
Image Sensor PhotoActive Area 12.80 mm (h) x 12.80 mm (v) x 18.10 mm (Diagonal)  
Electronic Shutter Global
Interface CoaXPress V2.0 (4 x 12.5 Gbit/s)
Digital I/O 1 Opto-Isolated Trigger In, 1 TTL Sync Output
Lens Mount F-Mount (Option for C, G or M42 Mount)
Supply Voltage PoCXP (Power Over CoaXPress)
Power Consumption 12 Watts
Dimensions 65 mm x 65 mm x 71 mm
Mass 400 g
Operating Temperature Range 0C – 40C

 

OVERVIEW

Cyclone 25-150 is a, Ultra High Resolution machine vision camera with high frame rate of 150 frames/sec at full 25 MegaPixel resolution .

The camera also supports Region of Interest (ROI) operation, which provides an increased frame rate by decreasing the number of pixels in a frame. For example, the Cyclone 25-150 camera can operate at 4,838 frames per second when the frame size is reduced to 1920 x 1080  pixels. 

TheGpixel GMAX0505 image sensor used in the camera features a full-frame GLOBAL electronic shutter, and is available in both monochrome and color versions 

Similar to all models of CamPerform-Cyclone series the CoaXPress V 2.0, operating allfour  channels at 12.5 Gb/s each, for a total bandwidth of 50 Gb/s.

MECHANICAL

Cyclone 25-150 3D CAD  STEP FILE 

DOWNLOADS

Cyclone 25-150 DATASHEET
Cyclone 25-150 Manual
Cyclone 25-150 3D CAD  STEP FILE 

 

ACCESSORIES

F-Mount lens adapter
CP-FM
C-Mount lens adapter

CP-CM
G-Mount lens adapter

CP-FMG
M42x1 lens adapter

CP-M42
M42x0.75 lens adapter

CP-T2
Power supply CP70, CP90
Power supply CP80CPH4-PSA for CP70- and CP90-Series (Figure)
CPL3-PSA for CP80-Series

Pigtail cable CP70, CP90
Pigtail cable CP80

for Synch-In and Synch-Out signals
CPH6-PTC for CP70- and CP90-Series (Figure)
CPL4-PTC for CP80-Series

Programming cable CP70, CP90
Programming cable CP80

to be used for firmeware update
CPH6-USB for CP70- and CP90-Series (Figure)
CPL4-USB for CP80-Series
Shopping Cart
Scroll to Top