SPECIFICATIONS
| Model | Opto-Coupled Trigger 5 – Trigger Board |
| Part Number | 2200000371 |
| Accessory Type | Trigger Board |
| Supported Frame Grabbers | microEnable 5 ironman, microEnable 5 marathon, microEnable IV |
| Connectors | 2 x SUB-D15 (female) Socket |
| Inputs/Outputs | 8 inputs / 8 Outputs mapped on two ports |
| Signal Transfer Protection | Opto-Coupled, Galvanic Isolation |
| Connection to Frame Grabber | 34-pin Ribbon Cable (included) |
| PC Case Mounting | Standard Profile Height, no PCI slot necessary |
| Signal Driver to Frame Grabber | Open-Collector BJT |
| Trigger Configurations | Outputs: Inverted/Non-Inverted |
APPLICATION SUPPORT
| Multi Trigger Board Operation | SUPPORTED |
| Mixed Mode (TTL/opto trigger) | SUPPORTED |
| Multi frame grabber operation | SUPPORTED |
ELECTRICAL & ENVIRONMENTAL
| Supported Voltage Levels | 4.5 V to 28V (VCC) |
| Signal Polarity | Configurable |
| Maximum Frequency | 2.5 MHZ |
| Minimum Pulse Width | 200 nsec |
| V Input Level LOW | < 0.2 VCC |
| V Input Level HIGH | > 0.2 VCC |
| Differential Input Voltage | 10 mV |
| Input Current | 4 mA |
| V Output Level LOW | + 0.3 V |
| V Output Level HIGH | VCC – 0.3 V |
| Output Current Level LOW | 20 mA |
| Output Current Level HIGH | – 20 mA |
| Operating Temperature Range | – 40C to + 85 C (- 40 F to + 185 F) |