GO-5101M-PMCL

SPECIFICATIONS

Model	GO-5101M-PMCL
Product Family	Go Series
Interface	Mini CameraLink (PoCL)
System Clock	74.25 MHz (for pulse generator)
Readout Modes	FULL: 2464 (h) x 2056 (v) up to 35.6 fps ROI: 2 lines to 2056 lines in 2 line steps, 96 to 2464 pixels wide in 16 pixel steps BINNING: 1×2, 2×2, 2×1 (monochrome only)
Image Sensor	Sony IMX264
Horizontal Pixels	2,464
Vertical Pixels	2,056
Total Pixels	3.45 MegaPixels
Frame Rate	1635 f/s
COLOR or Monochrome	Monochrome
Spectral Range	Visible + NIR
Optics Format	2/3 inch
Image Sensor PhotoActive Diagonal	11.071 mm
Pixel Size	3.45 μm
Lens Mount	C-mount
Electronic Shutter	Global
Pixel Formats	Mono8, Mono10, Mono12
Frame Synchronization	Internal
Trigger Input	TTL, Camera Link (CC1), NAND, Pulse Generator, Software
General Purpose I/O (GPIO)	1 TTL Output Line

ELECTRICAL

Power Input	12V to 24V DC ± 10% (12V ± 1V DC via PoCL)
Power Consumption	2.88 W typical @ 12V

MECHANICAL

Case Type	Metal Shielded Box
Case Size (L x W x H)	29.0 mm x 29.0 mm x 41.5 mm
Mass	46 g
Vibration Tolerance	10 G (20 Hz to 200 Hz XYZ)
Shock Tolerance	80 G

STANDARDS COMPLIANCE

REGULATIONS

CE (EN61000-6-2, EN61000-6-3), FCC Part 15 Class B, RoHS/WEEE

ENVIRONMENTAL

Operating Temperature	-5°C to +45°C
Storage Temperature	-25°C to +60°C
Humidity	20% – 80% non-condensing

OVERVIEW

Small and lightweight

Like all Go Series cameras, the GO-5101C-PMCL measures 29 x 29 x 41.5 mm (excluding lens mount) and weighs only 46 grams enabling it to fit into small spaces or be mounted on vehicles or robot arms where size and weight are critical.

High image quality and dynamic range

The GO-5101C-PMCL leverages the low-noise pixel design of the Sony Pregius IMX264 CMOS imager. This imager provides the same excellent sensitivity and native dynamic range as the IMX250 used in the GO-5100 models – but at a more economical price point.

Proven reliability in industrial environments

Despite its small size and weight, the GO-5101C-PMCL is built for the real world, with sturdy housings and extensive shock (80G) and vibration (10G) testing to deliver one of the best MTBF ratings of any small camera – over 200,000 hours. A 3-year warranty is standard.

OPTICS

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	8.501 mm
	Vertical PhotoActive Area (PAA v)	7.093 mm
	Diagonal PhotoActive Area (PAA diag)	11.071 mm
	Image Sensor Resolution	145 line pairs/mm
	C-Mount Flange Distance	17.526 mm

I/O Pinout

JAI GO PMCL I/O CONNECTOR

COMPATIBLE CONNECTORS:

Camera Side: 09-3111-81-04 (Binder)

Cable Side: 79-3108-52-04 (Binder) AWG 26
or 79-3108-32-04 (Binder) AWG 24

4-PIN I/O CONNECTOR PINOUT

PIN	DESIGNATION	FUNCTION
1	DC Power IN	+12 to =24 VDC ± 10%
2	Input	TTL in, Line 4
3	Output	TTL out, Line 1
4	GND	Power Supply COMMON GROUND

DOWNLOADS

GO-5101-PMCL DATASHEET
GO-5101-PMCL MANUAL
GO-5101-PMCL MECHANICAL DRAWING
GO-5101-PMCL FRAME RATE CALCULATOR

5 Megapixel 2/3″ CMOS Image Sensor

Up to 35 fps at full resolution

3.45 μm Larg Square Pixels

Compact Size (29 x 29 x 51.5 mm)

SPECIFICATIONS