GO-5100MP-USB

USB 3.0 Mono Polarsens Camera

  • 5.1 MegaPixel 2/3″ Sony Polarsens Image Sensor

  • Up to 74 fps at full resolution

  • 3.45 μm Square Pixels

  • Compact Size (29 x 29 x 51.5 mm)

 

$ 1,320.00

SPECIFICATIONS

Model GO-5100MP-USB
Product Family Go Series
Interface USB3 Vision (PoUSB)
Image Sensor Sony IMX250MRZ
Horizontal Pixels 2,464
Vertical Pixels 2,056
Total Pixels 5.1 MegaPixels
Frame Rate 74 f/s
COLOR or Monochrome Monochrome
Spectral Range Visible + NIR
Optics Format 2/3 inch
Image Sensor PhotoActive Diagonal 11.071 mm
Pixel Size 3.45 μm
Lens Mount C-mount
Electronic Shutter Global
Pixel Formats 8 Bit Mono,10 Bit Mon,10 Bit Mono Packed
12Bit Mono,12Bit Mono Packed
Frame Synchronization Free-run
Hardware trigger
Software trigger
Digital Inputs 2 Opto-Isolated Input line
General Purpose I/O (GPIO) 2 General Purpose I/O (GPIO) lines

ELECTRICAL

Voltage Input 5.0 VDC (Provided by USB 3.0 interface)
Power Consumption 4.1 Watts

MECHANICAL

Case Type Metal Shielded Box
Case Size (L x W x H) 29.0 mm x 29.0 mm x 51.5 mm
Mass 46 g
Vibration Tolerance 10 G (20 Hz to 200 Hz XYZ)
Shock Tolerance 80 G

STANDARDS COMPLIANCE

REGULATIONS CE (EN61000-6-2, EN61000-6-3),  FCC Part 15 Class B, RoHS/WEEE

ENVIRONMENTAL

Operating Temperature -5°C to +45°C
Storage Temperature -25°C to +60°C
Humidity 20% – 80% non-condensing

FEATURES

Image sensor with polarization capabilites

Each image pixel incorporates one of four separate polarizing nano wire grids angled at 0°, 45°, 90°, and 135° arranged in a regular pattern across the sensor. Thus, each block of four pixels can be used as a calculation block to determine the angle and intensity of light in a scene.

Advanced in-camera processing features

In-camera processing algorithms calculate polarization angle, amplitude and degree, as well as amount of polarized, unpolarized and average light. Other functions display pseudo-color and monochrome overlays showing the polarization (angle and) degree

USB3 Vision interface

The GO-5100MP-USB is equipped with a USB3 Vision interface enabling it to provide full 5.1 megapixel resolution (in 8-bit output) at up to 74 frames per second. 10-bit and 12-bit output is also supported.

OPTICS

OPTICS PARAMETERS







 Horizontal PhotoActive Area (PAA h) 8.501 mm
Vertical PhotoActive Area (PAA v) 7.093 mm
Diagonal PhotoActive Area (PAA diag) 11.071 mm
Image Sensor Resolution 144 line pairs/mm
C-Mount Flange Distance 17.526 mm

 

I/O Pinout

JAI GO USBI/O PINOUT
Hirose HR-10A-7R-6PB

6-PIN I/O CONNECTOR PINOUT

PIN DESIGNATION FUNCTION
1 DC IN +12 to =24VDC  ± 10%
2 Opto IN 1 Opto-coupled I/O input line 5
3 Opto OUT 1 Opto-coupled I/O output line 2
4 Opto OUT 2 Opto-coupled I/O output line 3
5 Opto COMMON General purpose I/O (GPIO) line
6 GND Power Supply Ground

DOWNLOADS

GO-5100MP-USB DATASHEET
GO-5100MP-USB MANUAL
GO-5100-USB MECHANICAL DRAWING
GO-5100MP USB Frame Rate Calculator
Shopping Cart
Scroll to Top