GO-5000M-PGE-UV

SPECIFICATIONS

Model	GO-5000M-PGE-UV
Product Family	Go Series
Interface	GigE Vision 1-Cable (PoE)
Image Sensor	Teledyne Lince5M
Horizontal Pixels	2,560
Vertical Pixels	2,048
Total Pixels	2.4 MegaPixels
Frame Rate	22 f/s
COLOR or Monochrome	Monochrome
Spectral Range	Visible + UV
Optics Format	1 inch
Image Sensor PhotoActive Diagonal	16.392 mm
Pixel Size	5.00 μm
Lens Mount	C-mount
Electronic Shutter	Global
Pixel Formats	Mono8, Mono10, Mono12
Frame Synchronization	Free-run Hardware trigger Software trigger
Digital Inputs	2 Opto-Isolated Input line
General Purpose I/O (GPIO)	2 General Purpose I/O (GPIO) lines

ELECTRICAL

Voltage Input	5.0 VDC (Provided by USB 3.0 interface)
Power Consumption	3.19 Watts

MECHANICAL

Case Type	Metal Shielded Box
Case Size (L x W x H)	29.0 mm x 29.0 mm x 51.5 mm
Mass	46 g
Vibration Tolerance	10 G (20 Hz to 200 Hz XYZ)
Shock Tolerance	80 G

STANDARDS COMPLIANCE

REGULATIONS

CE (EN61000-6-2, EN61000-6-3), FCC Part 15 Class B, RoHS/WEEE

ENVIRONMENTAL

Operating Temperature	-5°C to +45°C
Storage Temperature	-25°C to +60°C
Humidity	20% – 80% non-condensing

OVERVIEW

Small and lightweight

Like all Go Series cameras, the GO-5000M-PGE-UV measures 29 x 29 x 41.5 mm (excluding lens mount) and weighs only 46 grams enabling it to fit into small spaces or be mounted on vehicles or robot arms where size and weight are critical.

UVA Sensitivity

With usable UV sensitivity down to around 300 nm, the GO-5000M-PGE-UV provides an attractive alternative to the size, power, and cost of scientific UV cameras for applications in the UVA and upper UVB regions.

Quartz glass protection

The GO-5000M-PGE-UV imager is protected by a quartz glass cover with double AR (anti-reflective) coatings to protect the sensor from dirt and damage while maximizing light transmission compared to standard cover glass.

OPTICS

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	12.800 mm
	Vertical PhotoActive Area (PAA v)	10.240 mm
	Diagonal PhotoActive Area (PAA diag)	16.392 mm
	Image Sensor Resolution	100 line pairs/mm
	C-Mount Flange Distance	17.526 mm

I/O Pinout

JAI GO GigE I/O CONNECTOR
Hirose HR-10A-7R-6PB

6-PIN I/O CONNECTOR PINOUT

PIN	DESIGNATION	FUNCTION
1	DC IN	+12 to =24VDC ± 10%
2	Opto IN 1	Opto-coupled I/O input line 5
3	Opto OUT 1	Opto-coupled I/O output line 2
4	Opto OUT 2	Opto-coupled I/O output line 3
5	Opto COMMON	General purpose I/O (GPIO) line
6	GND	Power Supply Ground

DOWNLOADS

GO-5000M-PGE-UV DATASHEET
GO-5000M-PGE MANUAL
GO-5000-PGE MECHANICAL DRAWING
GO-5000-PGE FRAME RATE CALCULATOR

5.24 Megapixel 1″ UV-Sensitive CMOS Image Sensor

Up to 22 fps at full resolution

5.00 μm Large Square Pixels

Compact Size (29 x 29 x 41.5 mm)

SPECIFICATIONS