Domino Melody

Low-profile Analog Frame Grabber

for one single-tap non-standard analog camera

One 10-bit 40 MHz A/D converter with one 8- or 10-bit LUT
32-bit 33 MHz PCI bus, standard and low profile brackets
D³ technology for extremely low synchronization jitter
Support for mega-pixel progressive-scan and interlaced cameras, asynchronous reset and exposure control
Trigger, strobe and general purpose I/O lines

SPECIFICATIONS

CAMERA / VIDEO INPUTS

Interface standard(s)	Non-standard Analog
Connectors	CAMERA: high-density sub-D 15-pin male connector on the bracket Camera internal: 10-pin shrouded header video connector on the PCB
Termination resistor	Selectable by software
Number of cameras	One single-tap camera
Number of cameras (at full frame rate)	1
A/D converter	One, 10-bit, 40 MHz
Maximum camera line rate	49.5 kHz in synchronous mode 31.5 kHz in asynchronous reset mode

ON-BOARD PROCESSING

On-board memory	16 MB (8 MB for image data)
Input LUT (Lookup Table)	1 x 8- or 10-bit LUT

MECHANICAL

MECHANICAL

Format	Low profile, half-length, 32-bit Conventional PCI card
Dimensions	168 mm x 64 mm (6.6 in x H 2.21 in)

ENVIRONMENTAL

Operating ambient air temperature	0 to +50 °C / +32 to +122 °F
Operating ambient air humidity	10 to 90% RH non-condensing
Storage ambient air temperature	-20 to +70 °C/ -4 to +158 °F
Storage ambient air humidity	10% to 90% RH non-condensing

CERTIFICATIONS

Electromagnetic – EMC standards	European Council EMC Directive 2004/108/EC United States FCC rule 47 CFR 15
EMC – Emission	EN 55022:2010 Class B FCC 47 Part 15 Class B
EMC – Immunity	EN 55024:2010 Class B EN 61000-4-2 EN 61000-4-3 EN 61000-4-4
KC Certification	Korean Radio Waves Act, Article 58-2, Clause 3
Flammability	PCB compliant with UL 94 V-0
RoHS	European Union Directive 2015/863 (ROHS3)
REACH	European Union Regulation 1907/2006
WEEE	Must be disposed of separately from normal household waste and must be recycled according to local regulations

HOST BUS

HOST BUS

Standard	PCI 32-bit, 33 MHz, 3.3 V and 5 V signaling
DMA	32-bit
Peak delivery bandwidth	132 MB/s
Effective (sustained) delivery bandwidth	90 MB/s (Host PC motherboard dependent)
Power consumption	Max. 6.8 W (1.45 A @ +3.3V, 400 mA @ +5V), excluding I/O power output

GPIO

GENERAL PURPOSE INPUTS AND OUTPUTS

Number of lines	4 I/O lines: 1 differential input (TR) 1 opto-isolated output (ST) 2 TTL inputs/outputs (ENHANCED IO)
Connectors	SYSTEM: 8-pin RJ-45 connector on the bracket SYSTEM INTERNAL: 10-pin dual-row 0.1″ shrouded header on the PCB CAMERA POWER: 4-pin Molex connector on the PCB for camera powering
Usage	Camera and image acquisition trigger Light strobe trigger General purpose IO
Electrical specifications	TR: Inputs compatible with TTL, LVTTL, differential LVDS, differential RS-422, differential RS-485 signals, protected against electrostatic discharge, with choke for the rejection of common-mode noise ST: Opto-isolated outputs, compatible with signals up to 60V, with 3 µs fall time, isolated up to 500V ENHANCED IO Inputs or outputs compatible with TTL signals, protected against electrostatic discharge, with high-frequency noise filter

SOFTWARE

SOFTWARE

Host PC Operating System

Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
Linux for x86 (32-bit) and x86-64 (64-bit) processor architectures

Refer to release notes for details

APIs

MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers

DOWNLOADS

DOWNLOADS

DOMINO MELODY DATASHEET