daA2500-14uc (S-Mount)

This Post does not publish to the site.

Use only the short product description for product image and short overview, then use the TABS for supporting files.

Note Also Product will not have an “add to cart” button unless the price is provided.

SPECIFICATIONS

Model	daA2500-14uc (S-Mount)
Part Number	106697
Product Family	Basler dart
Interface	USB 3.0
Image Sensor	OnSemi MT9P031
COLOR or Monochrome	Color
Optics Format	1/2.5 inch
Lens Mount	S-Mount (M12)
Horizontal Pixels	2592
Vertical Pixels	1944
Total Pixels	5.04 MegaPixels
Frame Rate	14 Frames/sec
Electronic Shutter	Rolling Shutter
Pixel Size	2.20 um
Pixel Depth	8, 12 bits
Pixel Output Formats	Bayer 12 Bayer 8 RGB 8 YCbCr422_8 (YUV422_8)
Frame Synchronization	Hardware Trigger Free-Run Mode Software trigger
Exposure Control	Programmable via the camera API Hardware trigger
Digital Inputs	1
Digital Outputs	2
General Purpose I/O (GPIO)	2
Power Input	via USB 3.0 interface
Power Consumption	1.3 Watts
Dimensions	19.9 mm x 29.3 mm x 29 mm
Operating Temperature	0 to 50 C
Mass	15 g
Standards Compliance	CE, RoHS, GenICam, UL, USB3 Vision, FCC, KC

Chunks	Exposure Time Gain
Color Creation and Enhancement	Auto Function Profile: Anti-Flicker Backlight Compensation Brightness and Contrast
I/O Control	Debouncer
Image Acquisition Control	Acquisition Frame Rate Acquisition Mode Acquisition Start, Stop, and Abort Sensor Shutter Mode Triggered by Hardware Triggered by Software
Line Source Signals	Flash Window
Miscellaneous	Defect Pixel Correction Device Information Parameters User Sets (Configuration Sets)
PGI	Denoising Improved Sharpness
Pixel Formats	Mono 12 Mono 8
Standard Features	Auto Function Profile Binning Black Level Exposure Auto Exposure Mode: Timed Exposure Mode: Trigger Width Exposure Time Gain Gain Auto Gamma Correction Image ROI (Region of Interest) Reverse X (Horizontal Mirroring) Reverse Y (Vertical Mirroring) Test Patterns

OPTICS PARAMETERS

Connector Locations

I/O Connector Pinout

I/O Connector	PIN	LABLE	FUNCTION
	1	–	3.3 VDC, 20 mA Maximum (CAUTION: Do not apply power to this pin)
	2	–	Ground
	3	Line 1	General Purpose I/O (GPIO) line PRESET: INPUT LINE
	4	Line 2	General Purpose I/O (GPIO) line PRESET: INPUT LINE
	5	–	Not Connected
	6	–	Not Connected

Basler Dart USB 3.0 Manual.pdf
Basler-dart-USB3-S-Mount-v04.pdf (drawing)