This Post does not publish to the site.
Use only the short product description for product image and short overview, then use the TABS for supporting files.
Note Also Product will not have an “add to cart” button unless the price is provided.
| Model | daA2448-70uc (No-Mount) |
| Part Number | 108622 |
| Product Family | Basler dart |
| Interface | USB 3.0 |
| Image Sensor | Sony IMX548 |
| COLOR or Monochrome | Color |
| Optics Format | 1/1.8 inch |
| Lens Mount | None |
| Horizontal Pixels | 2448 |
| Vertical Pixels | 2048 |
| Total Pixels | 5.00 MegaPixels |
| Frame Rate | 70 Frames/sec |
| Electronic Shutter | Global Shutter |
| Pixel Size | 2.74 um |
| Pixel Depth | 8, 12 bits |
| Pixel Output Formats |
BGR 8
Bayer RG 12
Bayer RG 12p
Bayer RG 8
Mono 12
Mono 12p
Mono 8
RGB 8
YCbCr422_8 (YUV422_8)
|
| Frame Synchronization | Hardware Trigger Free-Run Mode Software Trigger |
| Exposure Control | Programmable via the camera API Hardware trigger |
| Digital Inputs | 0 |
| Digital Outputs | 0 |
| General Purpose I/O (GPIO) | 4 |
| Power Input | via USB 3.0 interface |
| Power Consumption | 1.8 Watts |
| Dimensions | 8 mm x 27 mm x 27 mm |
| Operating Temperature | 0 to 50°C |
| Mass | 5 g |
| Standards Compliance | CE, RoHS, GenICam, UL, USB3 Vision, FCC, KC |
| Chunks |
Auto Brightness Status
CRC Checksum
Counter Value
Exposure Time
Frame ID
Gain
Line Status All
Timestamp
Timestamp Value
|
| Color Creation and Enhancement |
Balance White (Manual White Balance)
Balance White Auto (Automatic White Balance)
Brightness and Contrast
Hue and Saturation
|
| Event Reporting |
Exposure End
Frame Buffer Overrun
Frame Start
Frame Trigger Missed
Overrun
Temperature Status Changed
Test
|
| I/O Control |
Input Filter
Line Connection
Two-Wire Interface
|
| Image Acquisition Control |
Acquisition Frame Rate
Acquisition Mode
Acquisition Start, Stop, and Abort
Acquisition Status
Exposure Active Trigger
Exposure End Trigger
Exposure Start Delay
Exposure Start Trigger
Frame Active Trigger
Frame Burst Active Trigger
Frame Burst End Trigger
Frame Burst Start Trigger
Frame End Trigger
Frame Start Trigger
High Speed Burst Mode
Sensor Readout Time
Trigger Delay
Triggered by Hardware
Triggered by Software
|
| Line Source Signals |
Counter Active
Exposure Active
Frame Burst Active
Frame Burst Trigger Wait
Frame Trigger Wait
Timer 1 Active, Timer 2 Active
|
| Miscellaneous |
Defect Pixel Correction
Device Information Parameters
Device Temperature
Sensor Bit Depth
Temperature State
User Sets (Configuration Sets)
User-Defined Values
|
| PGI |
Color-Anti-Aliasing
Denoising
Improved Sharpness
|
| Pixel Formats |
BGR 8
Bayer RG 12
Bayer RG 12p
Bayer RG 8
Mono 12
Mono 12p
Mono 8
RGB 8
YCbCr422_8 (YUV422_8)
|
| Standard Features |
Auto Function Profile
Black Level
Center X and Center Y
Counter
Digital Shift
Exposure Auto
Exposure Mode: Timed
Exposure Mode: Trigger Controlled
Exposure Mode: Trigger Width
Exposure Time
Gain
Gain Auto
Gamma Correction
Image ROI (Region of Interest)
Reverse X (Horizontal Mirroring)
Reverse Y (Vertical Mirroring)
Test Patterns
Timer
|
OPTICS PARAMETERS
 |
Horizontal PhotoActive Area (PAA h) | 6.708 mm |
| Vertical PhotoActive Area (PAA v) | 5.612 mm | |
| Diagonal PhotoActive Area (PAA diag) | 8.745 mm | |
| Image Sensor Resolution | 183 line pairs/mm |
| Case Type | Board Level (no case) |
| Board Size (Thickness x W x H) | 8 mm x 27 mm x 27 mm |
| Mass | 5 g |
Connector Locations
 |
 |
I/O Connector Pinout
I/O Connector |
PIN | LABLE | FUNCTION |
| 1 | – | 3.3 VDC, 20 mA Maximum (CAUTION: Do not apply power to this pin) | |
| 2 | – | Ground | |
| 3 | Line 1 | General Purpose I/O (GPIO) line PRESET: INPUT LINE | |
| 4 | Line 2 | General Purpose I/O (GPIO) line PRESET: INPUT LINE | |
| 5 | – | Not Connected | |
| 6 | – | Not Connected |
Basler dart USB3 bare board IMX548 v01
DRAWING DOWNLOAD
| Basler-dart-USB3-bare-board-IMX548-v01.pdf |  |
