daA1920-160um (CS-Mount)

SPECIFICATIONS

Model	daA1920-160um (CS-Mount)
Part Number	108231
Product Family	Basler dart
Interface	USB 3.0
Image Sensor	Sony IMX392
COLOR or Monochrome	Mono
Optics Format	1/2.3 inch
Lens Mount	CS-Mount
Horizontal Pixels	1920
Vertical Pixels	1200
Total Pixels	2.30 MegaPixels
Frame Rate	160 Frames/sec
Electronic Shutter	Global Shutter
Pixel Size	3.45 um
Pixel Depth	8, 12 bits
Pixel Output Formats	Mono 12 Mono 8
Frame Synchronization	Hardware Trigger Free-Run Mode Software Trigger
Exposure Control	Programmable via the camera API Hardware trigger
Digital Inputs	0
Digital Outputs	0
General Purpose I/O (GPIO)	4
Power Input	via USB 3.0 interface
Power Consumption	1.8 Watts
Dimensions	19.9 mm x 29.3 mm x 29 mm
Operating Temperature	0 to 50°C
Mass	15 g
Standards Compliance	CE, RoHS, GenICam, UL, USB3 Vision, FCC, KC

Chunks	Exposure Time Gain Timestamp
Color Creation and Enhancement	Brightness and Contrast
I/O Control	Input Filter
Image Acquisition Control	Acquisition Frame Rate Acquisition Mode Acquisition Start, Stop, and Abort Acquisition Status Exposure Active Trigger Exposure End Trigger Exposure Start Trigger Frame Active Trigger Frame Burst Active Trigger Frame Burst End Trigger Frame Burst Start Trigger Frame End Trigger Frame Start Trigger High Speed Burst Mode Sensor Readout Time Trigger Delay Triggered by Hardware Triggered by Software
Line Source Signals	Counter Active Exposure Active Frame Burst Active Frame Burst Trigger Wait Frame Trigger Wait Timer 1 Active, Timer 2 Active
Miscellaneous	Device Information Parameters Device Temperature Temperature State User Sets (Configuration Sets) User-Defined Values
PGI	Denoising Improved Sharpness
Pixel Formats	Mono 12 Mono 12p Mono 8
Standard Features	Auto Function Profile Binning Black Level Center X and Center Y Counter Exposure Auto Exposure Mode: Timed Exposure Mode: Trigger Controlled Exposure Mode: Trigger Width Exposure Time Gain Gain Auto Gamma Correction Image ROI (Region of Interest) Reverse X (Horizontal Mirroring) Reverse Y (Vertical Mirroring) Test Patterns Timer

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	6.624 mm
	Vertical PhotoActive Area (PAA v)	4.140 mm
	Diagonal PhotoActive Area (PAA diag)	7.811 mm
	Image Sensor Resolution	145 line pairs/mm

Connector Locations

I/O Connector Pinout

I/O Connector	PIN	LABLE	FUNCTION
	1	–	3.3 VDC, 20 mA Maximum (CAUTION: Do not apply power to this pin)
	2	–	Ground
	3	Line 1	General Purpose I/O (GPIO) line PRESET: INPUT LINE
	4	Line 2	General Purpose I/O (GPIO) line PRESET: INPUT LINE
	5	–	Not Connected
	6	–	Not Connected

DRAWING DOWNLOAD

Basler-dart-USB3-CS-M-gen2-0.3spacer-v01.pdf

Basler Dart USB 3.0 Manual.pdf
Basler-dart-USB3-CS-M-gen2-0.3spacer-v01.pdf