daA1920-160uc (No-Mount)

Board-Level COLOR CMOS Camera

  • 1,920 x 1,200 pixels @ 160 frames/sec
  • USB 3.0 Interface
  • Bare Board – Lens Mount not Included

$ 279.00

SPECIFICATIONS

Model daA1920-160uc (No-Mount)
Part Number 108232
Product Family Basler dart
Interface USB 3.0
Image Sensor Sony IMX392
COLOR or Monochrome Color
Optics Format 1/2.3 inch
Lens Mount None
Horizontal Pixels 1920
Vertical Pixels 1200
Total Pixels 2.30 MegaPixels
Frame Rate 160 Frames/sec
Electronic Shutter Global Shutter
Pixel Size 3.45 um
Pixel Depth 8, 12 bits
Pixel Output Formats
BGR 8
Bayer RG 12
Bayer RG 12p
Bayer RG 8
Mono 12
Mono 12p
Mono 8
RGB 8
YCbCr422_8 (YUV422_8)
Frame Synchronization Hardware Trigger
Free-Run Mode
Software Trigger
Exposure Control Programmable via the camera API
Hardware trigger
Digital Inputs 0
Digital Outputs 0
General Purpose I/O (GPIO) 4
Power Input via USB 3.0 interface
Power Consumption 1.8 Watts
Dimensions 8 mm x 27 mm x 27 mm
Operating Temperature 0 to 75°C
Mass 5 g
Standards Compliance CE, RoHS, GenICam, UL, USB3 Vision, FCC, KC

 

FEATURES

Chunks
Auto Brightness Status
CRC Checksum
Counter Value
Exposure Time
Frame ID
Gain
Line Status All
Timestamp
Timestamp Value
Color Creation and Enhancement
Balance White (Manual White Balance)
Balance White Auto (Automatic White Balance)
Brightness and Contrast
Hue and Saturation
Event Reporting
Exposure End
Frame Buffer Overrun
Frame Start
Frame Trigger Missed
Overrun
Temperature Status Changed
Test
I/O Control
Input Filter
Line Connection
Two-Wire Interface
Image Acquisition Control
Acquisition Frame Rate
Acquisition Mode
Acquisition Start, Stop, and Abort
Acquisition Status
Exposure Active Trigger
Exposure End Trigger
Exposure Start Delay
Exposure Start Trigger
Frame Active Trigger
Frame Burst Active Trigger
Frame Burst End Trigger
Frame Burst Start Trigger
Frame End Trigger
Frame Start Trigger
High Speed Burst Mode
Sensor Readout Time
Trigger Delay
Triggered by Hardware
Triggered by Software
Line Source Signals
Counter Active
Exposure Active
Frame Burst Active
Frame Burst Trigger Wait
Frame Trigger Wait
Timer 1 Active, Timer 2 Active
Miscellaneous
Defect Pixel Correction
Device Information Parameters
Device Temperature
Sensor Bit Depth
Temperature State
User Sets (Configuration Sets)
User-Defined Values
PGI
Color-Anti-Aliasing
Denoising
Improved Sharpness
Pixel Formats
BGR 8
Bayer RG 12
Bayer RG 12p
Bayer RG 8
Mono 12
Mono 12p
Mono 8
RGB 8
YCbCr422_8 (YUV422_8)
Standard Features
Auto Function Profile
Black Level
Center X and Center Y
Counter
Exposure Auto
Exposure Mode: Timed
Exposure Mode: Trigger Controlled
Exposure Mode: Trigger Width
Exposure Time
Gain
Gain Auto
Gamma Correction
Image ROI (Region of Interest)
Reverse X (Horizontal Mirroring)
Reverse Y (Vertical Mirroring)
Test Patterns
Timer

OPTICS

OPTICS PARAMETERS

Horizontal PhotoActive Area (PAA h) 6.624 mm
Vertical PhotoActive Area (PAA v) 4.140 mm
Diagonal PhotoActive Area (PAA diag) 7.811 mm
Image Sensor Resolution 145 line pairs/mm

 

MECHANICAL & I/O Pinout

Case Type Board Level (no case)
Board Size (Thickness x W x H) 8 mm x 27 mm x 27 mm
Mass 5 g

Connector Locations 

Camera Connectors and LED Indicator Camera USB 3.0 Connector

I/O Connector Pinout

I/O Connector
Pin Numbering for the I/O Connector		 PIN LABLE FUNCTION
1 – 3.3 VDC, 20 mA Maximum (CAUTION: Do not apply power to this pin)
2 – Ground
3 Line 1 General Purpose I/O (GPIO) line PRESET: INPUT LINE
4 Line 2 General Purpose I/O (GPIO) line  PRESET: INPUT LINE
5 – Not Connected
6 – Not Connected

 

IB10268904

 

DRAWING DOWNLOAD

IB10268904.pdf

 

DOWNLOADS

Basler Dart USB 3.0 Manual.pdf
IB10268904.pdf (mechanical drawing)
Shopping Cart
Scroll to Top