This Post does not publish to the site.
Use only the short product description for product image and short overview, then use the TABS for supporting files.
Note Also Product will not have an “add to cart” button unless the price is provided.
| Model | daA1920-15um (No-Mount) |
| Part Number | 106732 |
| Product Family | Basler dart |
| Interface | USB 3.0 |
| Image Sensor | OnSemi MT9P031 |
| COLOR or Monochrome | Mono |
| Optics Format | 1/3.7 inch |
| Lens Mount | None |
| Horizontal Pixels | 1920 |
| Vertical Pixels | 1080 |
| Total Pixels | 2.07 MegaPixels |
| Frame Rate | 15 Frames/sec |
| Electronic Shutter | Rolling Shutter |
| Pixel Size | 2.20 um |
| Pixel Depth | 8, 12 bits |
| Pixel Output Formats | Mono 8, Mono 12 |
| Frame Synchronization | Hardware Trigger, Free-Run Mode, Software trigger |
| Exposure Control | Programmable via the camera API Hardware trigger |
| Digital Inputs | 1 |
| Digital Outputs | 2 |
| General Purpose I/O (GPIO) | 2 |
| Power Input | via USB 3.0 interface |
| Power Consumption | 1.2 Watts |
| Dimensions | 7.2 mm x 27 mm x 27 mm |
| Mass | 5 g |
| Standards Compliance | CE, RoHS, GenICam, UL, USB3 Vision, FCC, KC |
| Chunks |
Exposure Time
Gain
|
| Color Creation and Enhancement |
Auto Function Profile: Anti-Flicker
Backlight Compensation
Brightness and Contrast
|
| I/O Control |
Debouncer
|
| Image Acquisition Control |
Acquisition Frame Rate
Acquisition Mode
Acquisition Start, Stop, and Abort
Sensor Shutter Mode
Triggered by Hardware
Triggered by Software
|
| Line Source Signals |
Flash Window
|
| Miscellaneous |
Defect Pixel Correction Mode
Device Information Parameters
User Sets (Configuration Sets)
|
| PGI |
Denoising
Improved Sharpness
|
| Pixel Formats |
Mono 12
Mono 8
|
| Standard Features |
Auto Function Profile
Binning
Black Level
Exposure Auto
Exposure Mode: Timed
Exposure Mode: Trigger Width
Exposure Time
Gain
Gain Auto
Gamma Correction
Image ROI (Region of Interest)
Reverse X (Horizontal Mirroring)
Reverse Y (Vertical Mirroring)
Test Patterns
|
OPTICS PARAMETERS
 |
|
| Case Type | Board Level (no case) |
| Board Size (Thickness x W x H) | 7.2 mm x 27 mm x 27 mm |
| Mass | 5 g |
Connector Locations
 |
 |
I/O Connector Pinout
I/O Connector |
PIN | LABLE | FUNCTION |
| 1 | – | 3.3 VDC, 20 mA Maximum (CAUTION: Do not apply power to this pin) | |
| 2 | – | Ground | |
| 3 | Line 1 | General Purpose I/O (GPIO) line PRESET: INPUT LINE | |
| 4 | Line 2 | General Purpose I/O (GPIO) line PRESET: INPUT LINE | |
| 5 | – | Not Connected | |
| 6 | – | Not Connected |
Basler dart USB3 bare board MT9P v03
| Basler-dart-USB3-bare-board-MT9P-v03.pdf |  |