daA1600-60um (S-Mount)

This Post does not publish to the site.

Use only the short product description for product image and short overview, then use the TABS for supporting files.

Note Also Product will not have an “add to cart” button unless the price is provided.

SPECIFICATIONS

Model	daA1600-60um (S-Mount)
Part Number	106982
Product Family	Basler dart
Interface	USB 3.0
Image Sensor	Teledyne e2v EV76C570
COLOR or Monochrome	Mono
Optics Format	1/1.8 inch
Lens Mount	S-Mount (M12)
Horizontal Pixels	1600
Vertical Pixels	1200
Total Pixels	1.92 MegaPixels
Frame Rate	60 Frames/sec
Electronic Shutter	Global Shutter
Pixel Size	4.50 um
Pixel Depth	8, 12 bits
Pixel Output Formats	Mono 12 Mono 8
Frame Synchronization	Hardware Trigger Free-Run Mode Software Trigger
Exposure Control	Programmable via the camera API
Digital Inputs	1
Digital Outputs	2
General Purpose I/O (GPIO)	2
Power Input	via USB 3.0 interface
Power Consumption	1.3 Watts
Dimensions	19.9 mm x 29.3 mm x 29 mm
Operating Temperature	0 to 50 C
Mass	15 g
Standards Compliance	CE, RoHS, GenICam, UL, USB3 Vision, FCC, KC

Chunks	Exposure Time Gain
Color Creation and Enhancement	Auto Function Profile: Anti-Flicker Backlight Compensation Contrast Enhancement
I/O Control and Line Source Signals	Acquisition Trigger Wait / Frame Burst Trigger Wait Debouncer Exposure Active Flash Window Frame Trigger Wait Minimum Output Pulse Width Timer Active User Output
Image Acquisition Control	Acquisition Status Frame Start Trigger Triggered by Hardware Triggered by Software
Miscellaneous	Device Information Parameters User Defined Values User Sets (Configuration Sets)
PGI	Denoising Improved Sharpness
Pixel Formats	Mono 12 Mono 8
Standard Features	Auto Function Profile Binning Horizontal Binning Vertical Black Level Exposure Auto Exposure Mode: Timed (Control via API) Gain Gain Auto Gamma Correction Region of Interest (ROI) Reverse X (Horizontal Mirroring) Reverse Y (Vertical Mirroring) Test Patterns

OPTICS PARAMETERS

Connector Locations

I/O Connector Pinout

I/O Connector	PIN	LABLE	FUNCTION
	1	–	3.3 VDC, 20 mA Maximum (CAUTION: Do not apply power to this pin)
	2	–	Ground
	3	Line 1	General Purpose I/O (GPIO) line PRESET: INPUT LINE
	4	Line 2	General Purpose I/O (GPIO) line PRESET: INPUT LINE
	5	–	Not Connected
	6	–	Not Connected

DRAWING DOWNLOAD

Basler dart USB3 S-Mount v04.pdf

Basler Dart USB 3.0 Manual.pdf
Basler dart USB3 S-Mount v04.pdf (drawing)