CYCLONE-65-70-M

Cyclone Series High Speed Camera

  • 65 MegaPixels at 71 Frames/sec

  • Global Shutter

  • CoaXPress 2.0 Interface

 

Add to quote

SPECIFICATIONS

MODEL CYCLONE 65-70-M
Horizontal Pixels 9,344
Vertical Pixels 7,000
Total Pixels 65.41 MegaPixels
Frame Rate (Full Resolution) 71 frames/sec
Color or Monochrome Monochrome
Image Sensor Gpixel  GMAX3265
Pixel Size 3.20 um
Image Sensor PhotoActive Area 29.90 mm (h) x 22.40 mm (v) x 37.36 mm (Diagonal)  
Electronic Shutter Global
Interface CoaXPress V2.0 (4 x 12.5 Gbit/s)
Digital I/O 1 Opto-Isolated Trigger In, 1 TTL Sync Output
Lens Mount F-Mount (Option for C, G or M42 Mount)
Supply Voltage PoCXP (Power Over CoaXPress)
Power Consumption 14 Watts
Dimensions 65 mm x 65 mm x 71 mm
Mass 400 g
Operating Temperature Range 0C – 70C

 

OVERVIEW

The Optronis Cyclone 65-70 is an Ultra High Resolution machine vision camera with high frame rate of 71 frames/sec at full 65 MegaPixel resolution .

The camera also supports Region of Interest (ROI) operation, which provides an increased frame rate by decreasing the number of pixels in a frame. For example, the Cyclone 25-150 camera can operate at 449 frames per second when the frame size is reduced to 1920 x 1080  pixels. 

The Gpixel GMAX3265 image sensor used in the camera features a full-frame GLOBAL electronic shutter, and is available in both monochrome and color versions 

Similar to all models of CamPerform-Cyclone series the CoaXPress V 2.0, operating all four  channels at 12.5 Gb/s each, for a total bandwidth of 50 Gb/s.

MECHANICAL

Cyclone 65-70-M 3D CAD  STEP FILE 

DOWNLOADS

Cyclone 65-70-M Datasheet
Cyclone 65-70-M  Manual
Cyclone 65-70-M 3D CAD STEP FILE

 

ACCESSORIES

F-Mount lens adapter
CP-FM
C-Mount lens adapter

CP-CM
G-Mount lens adapter

CP-FMG
M42x1 lens adapter

CP-M42
M42x0.75 lens adapter

CP-T2
Power supply CP70, CP90
Power supply CP80CPH4-PSA for CP70- and CP90-Series (Figure)
CPL3-PSA for CP80-Series

Pigtail cable CP70, CP90
Pigtail cable CP80

for Synch-In and Synch-Out signals
CPH6-PTC for CP70- and CP90-Series (Figure)
CPL4-PTC for CP80-Series

Programming cable CP70, CP90
Programming cable CP80

to be used for firmeware update
CPH6-USB for CP70- and CP90-Series (Figure)
CPL4-USB for CP80-Series
Shopping Cart
Scroll to Top