CYCLONE-2-2000-C

High Speed Color Camera

  • 2-MegaPixels at 1,085 Frames/sec

  • Global Shutter

  • CoaXPress 2.0 Interface

 

Add to quote

SPECIFICATIONS

MODEL Cyclone-2-2000-C
Horizontal Pixels 1,920
Vertical Pixels 1,080
Total Pixels 2.07 MegaPixels
Frame Rate (Full Resolution) 2,166 frames/sec
Color or Monochrome COLOR
Image Sensor Alexima  LUX19HS
Pixel Size 10.00 um
Image Sensor PhotoActive Area 19.20 mm (h) x 10.80 mm (v) x 22.03 mm (Diagonal)  
Electronic Shutter Global
Interface CoaXPress V2.0 (4 x 12.5 Gbit/s)
Digital I/O 1 Opto-Isolated Trigger In, 1 TTL Sync Output
Lens Mount F-Mount (Option for C, G or M42 Mount)
Supply Voltage PoCXP (Power Over CoaXPress)
Power Consumption 12 Watts
Dimensions 65 mm x 65 mm x 71 mm
Mass 400 g
Operating Temperature Range 0C – 70C

 

OVERVIEW

The Cyclone-2-2000-M camera feature the high-performance Alixima LU19HS global shuttered HD-format CMOS image sensor. The sensor  is available in both monochrome and color versions. At full HD Resolution the Cyclone 2-2000-M camera provides than 2,100 full Frames per second.

The camera is also capable of operating in Region of Interest mode, which provides for even higher frame rates. For example, the camera runs at 5,143 frames/sec when operated in VGA (640 x 480) mode.

Signal processing in the Cyclone-2-2000 is optimized for low noise and high dynamic range.

MECHANICAL

Cyclone 2-2000 3D CAD STEP FILE

DOWNLOADS

Cyclone 2-2000 Datasheet
CamPerform Cyclone Manual
Cyclone 2-2000 Firmware
UCXP_Flash.exe – CP70-80-90-Cyclone Firmware Update Software
Cyclone 3D STEP File

 

ACCESSORIES

F-Mount lens adapter
CP-FM
C-Mount lens adapter

CP-CM
G-Mount lens adapter

CP-FMG
M42x1 lens adapter

CP-M42
M42x0.75 lens adapter

CP-T2
Power supply CP70, CP90
Power supply CP80CPH4-PSA for CP70- and CP90-Series (Figure)
CPL3-PSA for CP80-Series

Pigtail cable CP70, CP90
Pigtail cable CP80

for Synch-In and Synch-Out signals
CPH6-PTC for CP70- and CP90-Series (Figure)
CPL4-PTC for CP80-Series

Programming cable CP70, CP90
Programming cable CP80

to be used for firmeware update
CPH6-USB for CP70- and CP90-Series (Figure)
CPL4-USB for CP80-Series
Shopping Cart
Scroll to Top