CYCLONE-1HS-3500-M

High Speed Monochrome Camera

  • 1.31-MegaPixels at 3,518 Frames/sec

  • Global Shutter

  • CoaXPress 2.0 Interface

 

Add to quote

SPECIFICATIONS

MODEL Cyclone-1HS-3500
Horizontal Pixels 1,280
Vertical Pixels 860
Total Pixels 1.31 MegaPixels
Frame Rate (Full Resolution) 3,518 frames/sec
Color or Monochrome Monochrome
Image Sensor ON Semiconductor  LUX13HS
Pixel Size 13.70 um
Image Sensor PhotoActive Area 17.53 mm (h) x 11.78 mm (v) x 21.12 mm (Diagonal)  
Electronic Shutter Global
Interface CoaXPress V2.0 (4 x 12.5 Gbit/s)
Digital I/O 1 Opto-Isolated Trigger In, 1 TTL Sync Output
Lens Mount F-Mount (Option for C, G or M42 Mount)
Supply Voltage PoCXP (Power Over CoaXPress)
Power Consumption 12 Watts
Dimensions 65 mm x 65 mm x 71 mm
Mass 400 g
Operating Temperature Range 0C – 70C

 

OVERVIEW

Cyclone-1HS-3500 is a machine vision camera with very high frame rate of 3,500 frames/sec at full resolution.

The camera also supports Region of Interest (ROI) operation, which provides an increased frame rate by decreasing the number of pixels in a frame. For example, the Cyclone 1HS-3500 camera can operate at 7,000 frames per second when the frame size is reduced to 640 x 430 pixels. 

The LUX13HS image sensor used in the camera features a full-frame GLOBAL electronic shutter, and is available in both monochrome and color versions The relatively large 13.7 um square pixels provide High dynamic range and low noise.

Similar to all models of CamPerform-Cyclone series the CoaXPress V 2.0, operating all four  channels at 12.5 Gb/s each, for a total bandwidth of 50 Gb/s.

MECHANICAL

DRAWING DOWNLOADS

Cyclone 1HS-3500 3D CAD  STEP FILE

DOWNLOADS

Cyclone 1HS-3500 DATASHEET
Cyclone 1HS-3500 Manual
Cyclone 1HS-3500 3D CAD  STEP FILE 

 

ACCESSORIES

F-Mount lens adapter
CP-FM
C-Mount lens adapter

CP-CM
G-Mount lens adapter

CP-FMG
M42x1 lens adapter

CP-M42
M42x0.75 lens adapter

CP-T2
Power supply CP70, CP90
Power supply CP80CPH4-PSA for CP70- and CP90-Series (Figure)
CPL3-PSA for CP80-Series

Pigtail cable CP70, CP90
Pigtail cable CP80

for Synch-In and Synch-Out signals
CPH6-PTC for CP70- and CP90-Series (Figure)
CPL4-PTC for CP80-Series

Programming cable CP70, CP90
Programming cable CP80

to be used for firmeware update
CPH6-USB for CP70- and CP90-Series (Figure)
CPL4-USB for CP80-Series
Shopping Cart
Scroll to Top