CP80-4-C-500

SPECIFICATIONS

MODEL	CP80-4-C-500
Horizontal Pixels	2,304
Vertical Pixels	1,720
Total Pixels	3.96 MegaPixels
Frame Rate (Full Resolution)	500 frames/sec
Color or Monochrome	COLOR
Image Sensor	Alexima AM41
Pixel Size	7.00 um
Image Sensor PhotoActive Area	16.128 mm (h) x 12.040 mm (v) x 20.126 mm (Diagonal)
Electronic Shutter	GLOBAL
Interface	CoaXPress 1.1 (4 channel CXP-6) 4 x 75 Ω BNC connectors
Digital I/O	1 Opto-Isolated Trigger In 1 TTL Sync Output
Lens Mount	F-Mount (Option for C, G or M42 Mount)
Supply Voltage	PoCXP 24 VDC or external
Power Consumption	9.5 Watts
Dimensions	85 mm x 85 mm x 62.5 mm
Mass	400 g (without mount)
Operating Temperature Range	0C – 40C

OVERVIEW

The CP80-4-M/C-500 and CP90-4-M/C-500 cameras are equipped with a 4 megapixel AM41 monochrome or color image sensor from Alexima. An outstanding feature, in addition to the high image rate in global shutter mode, is the linear speed increase in the Y direction, which makes the sensor particularly well suited to Region of Interest high frame rate applications.

The sensor image is homogeneous and has an extremely low pixel error count of less than 4 over the entire sensor surface. The A/D converter depth is 8 bit. The CP80-4-*-500 and CP90-4-*-500 cameras of the CamPerform-CP series are specified to EMVA1288 and tested for consistent image quality.

MECHANICAL

MECHANICAL DRAWINGS

CP80-3-MC-540 und CP90-3-MC-540_CADModels

DOWNLOADS

DOCUMENTATION

CP90-4-M/C-500 Datasheet
CP90/CP80-4-M/C-500 Manual
CP80-4-MC-500 and CP90-4-MC-500 Firmware
CamPerform-CP / CamPerform-Cyclone Firmware Update Software

EVALUATION SOFTWARE

TimeViewerx86 (Version 1.4.2, 32 bit)
TimeViewerx64 (Version 1.4.2, 64 bit)

MECHANICAL DRAWINGS

CP80-4-M-500 and CP90-4-M-500_CAD_models

ACCESSORIES

	F-Mount lens adapter CP-FM
	C-Mount lens adapter CP-CM
	G-Mount lens adapter CP-FMG
	M42x1 lens adapter CP-M42
	M42x0.75 lens adapter CP-T2
	Power supply CP70, CP90 Power supply CP80CPH4-PSA for CP70- and CP90-Series (Figure) CPL3-PSA for CP80-Series
	Pigtail cable CP70, CP90 Pigtail cable CP80 for Synch-In and Synch-Out signals CPH6-PTC for CP70- and CP90-Series (Figure) CPL4-PTC for CP80-Series
	Programming cable CP70, CP90 Programming cable CP80 to be used for firmeware update CPH6-USB for CP70- and CP90-Series (Figure) CPL4-USB for CP80-Series