SPECIFICATIONS

MODEL	CP70-2-M-1000
Horizontal Pixels	1,920
Vertical Pixels	1,080
Total Pixels	2.07 MegaPixels
Frame Rate (Full Resolution)	1,085 frames/sec
Color or Monochrome	MONOCHROME
Image Sensor	LUXIMA LUX19HS
Pixel Size	10.00 um
Image Sensor PhotoActive Area	19.2x mm (h) x 10.8x mm (v) x 22.029 mm (Diagonal)
Electronic Shutter	Global
Interface	CoaXPress 1.1 (4 channel CXP-6) DIN 1.0/2.3 connector
Digital I/O	1 Opto-Isolated Trigger In, 1 TTL Sync Output
Lens Mount	F-Mount (Option for C, G or M42 Mount)
Supply Voltage	24 VDC
Power Consumption	10 Watts
Dimensions	85 mm x 85 mm x 99.5 mm
Mass	400 g
Operating Temperature Range	0C – 40C

OVERVIEW

TThe CP70-2-M/C-1000 camera provides full HD resolution at more than 1000 fps.

Large 10-micron Pixels pitch result in high light sensitivity. Low noise designs ensures accurate data to simplify measurement tasks.

Reducing the window size in vertical but also horizontal direction leads to higher Maximum Frame rate.

The camera provides adjustments for gain and offset. A factory set lookup table (LUT) is implemented.

The LUX19HS sensor is operated in global shutter mode and is available in monochrome and color versions.

DRAWING DOWNLOADS

DOCUMENTATION & FIRMWARE

CP70-2–M/C-1000 Datasheet
CP70-16-MC-148 Manual
CP70-16MC-148 Firmware
UCXP_Flash.exe Firmware Update Application

EVALUATION SOFTWARE

MECHANICAL DRAWINGS

	F-Mount lens adapter CP-FM
	C-Mount lens adapter CP-CM
	G-Mount lens adapter CP-FMG
	M42x1 lens adapter CP-M42
	M42x0.75 lens adapter CP-T2
	Power supply CP70, CP90 Power supply CP80CPH4-PSA for CP70- and CP90-Series (Figure) CPL3-PSA for CP80-Series
	Pigtail cable CP70, CP90 Pigtail cable CP80 for Synch-In and Synch-Out signals CPH6-PTC for CP70- and CP90-Series (Figure) CPL4-PTC for CP80-Series
	Programming cable CP70, CP90 Programming cable CP80 to be used for firmeware update CPH6-USB for CP70- and CP90-Series (Figure) CPL4-USB for CP80-Series