CP70-16-M-148

High Speed Machine Vision Camera

  • 16-MegaPixels at 148 Frames/sec

  • Global Shutter

  • CoaXPress v 1.1 Interface

 

SPECIFICATIONS

MODEL CP70-16-M-148
Horizontal Pixels 4,672
Vertical Pixels 3,416
Total Pixels 15.96 MegaPixels
Frame Rate (Full Resolution) 148 frames/sec
Color or Monochrome Monochrome
Image Sensor LUXIMA  LUX160
Pixel Size 3.90 um
Image Sensor PhotoActive Area 18.22 mm (h) x 13.32 mm (v) x 22.57 mm (Diagonal)  
Electronic Shutter Global
Interface CoaXPress 1.1 (4 channel CXP-6)
DIN 1.0/2.3 connector
Digital I/O 1 Opto-Isolated Trigger In, 1 TTL Sync Output
Lens Mount F-Mount (Option for C, G or M42 Mount)
Supply Voltage 24 VDC
Power Consumption 10 Watts
Dimensions 85 mm x 85 mm x 99.5 mm
Mass 400 g
Operating Temperature Range 0C – 40C

OVERVIEW

The Optronis CP70-16-M-148 camera features the LUX160 image sensor, providing full16-MegaPixel Resolution at 148 frames/sec.

Reducing the readout area (ROI mode) allows for a further increase in frame rate. For example, the CP70-16-M-148 camera operates at 2,021 frames/sec when the frame size is reduced to 1,024 x 512 pixels.

The signal processing inside the camera is optimized for low readout noise. Signal gain and offset can be adjusted. A hot-pixel-correction further improves image quality. 

MECHANICAL

DRAWING DOWNLOADS

DP70 3D PDF Format
CP70 STEP Format
CP70 DWFX-Format
ALL MOUNTS

DOWNLOADS

DOCUMENTATION & FIRMWARE

CP70-16-M/C-148 Datasheet 
CP70-16-MC-148 Manual
CP70-16MC-148 Firmware
UCXP_Flash.exe Firmware Update Application

EVALUATION SOFTWARE

TimeViewerx86 (Version 1.4.2, 32 bit)

TimeViewerx64 (Version 1.4.2, 64 bit)

 

MECHANICAL DRAWINGS

DP70 3D PDF Format
CP70 STEP Format
CP70 DWFX-Format
ALL MOUNTS
 

ACCESSORIES

F-Mount lens adapter
CP-FM
C-Mount lens adapter

CP-CM

G-Mount lens adapter

CP-FMG

M42x1 lens adapter

CP-M42

M42x0.75 lens adapter

CP-T2

Power supply CP70, CP90
Power supply CP80CPH4-PSA for CP70- and CP90-Series (Figure)
CPL3-PSA for CP80-Series

Pigtail cable CP70, CP90
Pigtail cable CP80

for Synch-In and Synch-Out signals
CPH6-PTC for CP70- and CP90-Series (Figure)
CPL4-PTC for CP80-Series

Programming cable CP70, CP90
Programming cable CP80

to be used for firmeware update
CPH6-USB for CP70- and CP90-Series (Figure)
CPL4-USB for CP80-Series

Shopping Cart
Scroll to Top