CP70-12-C-188

SPECIFICATIONS

MODEL	CP70-12-C-188
Horizontal Pixels	4,080
Vertical Pixels	3,072
Total Pixels	12.53 MegaPixels
Frame Rate (Full Resolution)	188 frames/sec
Color or Monochrome	COLOR
Image Sensor	AMS CMV12000
Pixel Size	5.50 um
Image Sensor PhotoActive Area	22.440 mm (h) x 16.896 mm (v) x 28.090 mm (Diagonal)
Electronic Shutter	GLOBAL
Interface	CoaXPress 1.1 (4 channel CXP-6) DIN 1.0/2.3 connector
Digital I/O	1 Opto-Isolated Trigger In, 1 TTL Sync Output
Lens Mount	F-Mount (Option for C, G or M42 Mount)
Supply Voltage	PoCXP or 24 VDC External
Power Consumption	8.5 Watts
Dimensions	85.0 mm x 85.0 mm x 49.0 mm
Mass	400 g
Operating Temperature Range	0C – 40C

OVERVIEW

The CP70-12-M/C-188 camera is equipped with a 12 megapixel CMV12000 monochrome or color AMS image sensor (CMOSIS).

In addition to the high frame rate in global shutter mode, its outstanding features are the high image quality and the low thermally-conditioned dark current, resulting in an extremely homogeneous dark and bright image over the entire sensor surface.

An expanded high dynamic range (HDR) can be set for large differences in brightness. The A/D converter depth is optionally 8 bit or 10 bit. The CP70-12-M/C-188 camera of the CamPerform-CP series is specified to EMVA1288 and tested for consistent image quality.

MECHANICAL

3D CAD DRAWING FILES

CP70 PDF-Format
CP70 STEP-Format
CP70 DWFX-Format
LENS MOUNT DRAWINGS

DOWNLOADS

CP70-12-MC-188 DataSheet
CP70-12-MC-188 Manual
CP70-12-MC-188 Firmware
CamPerform-CP / CamPerform-Cyclone Firmware Update Software
TimeViewerx86 (Version 1.4.2, 32 bit)
TimeViewerx64 (Version 1.4.2, 64 bit)

3D CAD DRAWING FILES

CP70 PDF-Format
CP70 STEP-Format
CP70 DWFX-Format
LENS MOUNT DRAWINGS

ACCESSORIES

	F-Mount lens adapter CP-FM
	C-Mount lens adapter CP-CM
	G-Mount lens adapter CP-FMG
	M42x1 lens adapter CP-M42
	M42x0.75 lens adapter CP-T2
	Power supply CP70, CP90 Power supply CP80CPH4-PSA for CP70- and CP90-Series (Figure) CPL3-PSA for CP80-Series
	Pigtail cable CP70, CP90 Pigtail cable CP80 for Synch-In and Synch-Out signals CPH6-PTC for CP70- and CP90-Series (Figure) CPL4-PTC for CP80-Series
	Programming cable CP70, CP90 Programming cable CP80 to be used for firmeware update CPH6-USB for CP70- and CP90-Series (Figure) CPL4-USB for CP80-Series