beA4000-62km OLD

SPECIFICATIONS

Model	beA4000-62km
Product Family	Basler Beat
Part Number	106574
Interface	CameraLink
Image Sensor	CMOSIS CMV-12000
COLOR or Monochrome	Monochrome
Optics Format	1.75 inch
Lens Mount Options	F-mount M58 x 0,75 M42 x 0.75 M42 x 1
Horizontal Pixels	4088
Vertical Pixels	3,070
Total Pixels	12.55 MegaPixels
Frame Rate	64 frames/sec
Electronic Shutter	Global
Pixel Size	5.50 um
Pixel Depth	10 or 12 bits
Output Formats	Mono8, Mono10, Mono12
Frame Synchronization	Software Trigger Free-Run Mode External Hardware Trigger
Digital Inputs	1
Digital Outputs	1
GPIO Ports	1
Power Input	POE or 12-24 VDC
Power Consumption	2.7 Watts (3.2 Watts POE)
Size	50 mm x 40 mm x 30 mm
Operating Temperature	0 to 50 C
Mass	210 g

EMVA Data

EMVA Quantum Efficiency (typical)	45.5 %
Dark Noise (typical)	13.7 electrons
Saturation Capacity (typical)	11,600 electrons
Dynamic Range (typical)	40.6 dB
Signal-to-Noise Ratio (typical)	40.1 dB

CERTIFICATIONS

Conformity	CE, RoHS, IP30, FCC, UL, KC
Industry Standards	GenICam, CameraLink

I/O Control	Debouncer Line Minimum Output Pulse Width
Image Acquisition Control	Trigger Delay Triggered by Software
Miscellaneous	Device Information Parameters User Sets (Configuration Sets)
Pixel Formats	Mono 10 Mono 12 Mono 8
Standard Features	Auto Function Profile Black Level Gain Gamma Correction Image ROI (Region of Interest) Lookup Table (LUT) Stacked Zone Imaging Test Images

I/O PIN NUMBER	DESIGNATION	FUNCTION
1	–	12–24 VDC Camera Power
2	Line 1	Opto-coupled I/O input line
3	Line 3	General purpose I/O (GPIO) line
4	Line 2	Opto-coupled I/O output line
5	–	Ground for opto-coupled I/O lines
6	–	Ground for camera power and GPIO lines

Camera Datasheet
Quick Start Guide
Mechanical Drawing
ACE USB3 Manual
3D Model: STEP File Drawing
Basler Pylon Software (Requires Registration)