acA640-90um

SPECIFICATIONS

Model	acA640-90um
Part Number	106221
Product Family	ace Classic
Interface	USB 3.0
Image Sensor	Sony ICX424 CCD
COLOR or Monochrome	Monochrome
Optics Format	1/3 inch
Lens Mount	C-mount
Horizontal Pixels	659
Vertical Pixels	494
Total Pixels	0.326 MegaPixels
Frame Rate	90 Frames/sec
Electronic Shutter	Global
Pixel Size	7.4 um
Pixel Depth	12 bits
Frame Synchronization	Hardware Trigger Free-Run Mode Software trigger
Exposure Control	Programmable via Camera API Hardware Trigger
Digital Inputs	1
Digital Outputs	1
Power Input	Via USB 3.0 interface
Power Consumption	2.7 Watts
Dimensions	29.3 mm x 29 mm x 29 mm
Operating Temperature	0 to 50 C
Mass	80 g
Standards Compliance	CE, RoHS, GenICam, IP30, UL, FCC, USB3 Vision, KC

EMVA DATA

EMVA Peak Quantum Efficiency	43.0%
Dark Noise	12.4 electrons
Saturation Capacity	14,900 electrons
Dynamic Range	61.6 dB
Signal-to-Noise Ratio	41.7 dB

Chunks	CRC Checksum Counter Value Exposure Time Gain Line Status All Sequencer Set Active Timestamp
Event Reporting	Exposure End Frame Burst Start Frame Burst Start Overtrigger Frame Burst Start Wait Frame Start Frame Start Overtrigger Frame Start Wait
I/O Control and Line Source Signals	Acquisition Trigger Wait / Frame Burst Trigger Wait Debouncer Exposure Active Frame Trigger Wait Minimum Output Pulse Width Timer Active User Output
Image Acquisition Control	Acquisition Start Trigger Acquisition Status Frame Burst Start Trigger Frame Start Trigger Trigger Delay Triggered by Hardware Triggered by Software
Miscellaneous	Device Information Parameters Remove Parameter Limits User Defined Values User Sets (Configuration Sets)
Pixel Formats	Mono 12 Mono 8
Standard Features	Auto Function Profile Binning Horizontal Binning Vertical Black Level Digital Shift Exposure Auto Exposure Mode: Timed (Control via API) Exposure Mode: Trigger Width (Control via External Trigger) Gain Gain Auto Gamma Correction Lookup Table (LUT) Region of Interest (ROI) Reverse X (Horizontal Mirroring) Sequencer Test Images

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	4.877 mm
	Vertical PhotoActive Area (PAA v)	3.656 mm
	Diagonal PhotoActive Area (PAA diag)	6.095 mm
	Image Sensor Resolution	68 line pairs/mm
	Rear Flange Distance	17.526 mm

PIN NUMBER	DESIGNATION	FUNCTION
1	Line 3	General purpose I/O (GPIO) line
2	Line 1	Opto-coupled I/O input line
3	Line 4	General purpose I/O (GPIO) line
4	Line 2	Opto-coupled I/O output line
5	–	Ground for opto-coupled I/O lines
6	–	Ground for General Purpose I/O (GPIO) lines

Basler Offline Product Documentation (36 MB)
Basler Ace USB3 Mechanical Drawing (128 KB)
3D CAD Drawings (848 kB Compressed File)
pylon Deployment Guide (Software Version 6.x) – Installation Guide (223 kB)