aca5472-17um

SPECIFICATIONS

Model	acA5472-17um
Part Number	107771
Product Family	ace U
Interface	USB 3.0
Image Sensor	Sony IMX183
COLOR or Monochrome	Monochrome
Optics Format	1 inch
Lens Mount	C-mount
Horizontal Pixels	5472
Vertical Pixels	3648
Total Pixels	19.962 MegaPixels
Frame Rate	17 frames/sec
Electronic Shutter	Rolling
Pixel Size	2.40 um
Pixel Depth	10/12 bits bits
Frame Synchronization	Software Trigger Hardware Trigger Free-Run
Exposure Control	Programmable via Camera API Hardware Trigger
Pixel Formats	Mono 12 Mono 12p (Mono 12 Packed) Mono 8
Digital Inputs	1
Digital Outputs	1
General Purpose I/O (GPIO)	2
Power Input	Via USB 3.0 Interface
Power Consumption	2.9 Watts
Dimensions	29.3 mm x 29 mm x 29 mm
Operating Temperature	0 to 50 C
Mass	80 g
Standards Compliance	RoHS, USB3 Vision, FCC Class B, CE, IP30, KC, GenICam, UL

EMVA DATA

EMVA Peak Quantum Efficiency	75.6 %
Dark Noise	3 electrons
Saturation Capacity	14,800 electrons
Dynamic Range	72.0 dB
Signal-to-Noise Ratio	41.7 dB

Chunks	CRC Checksum Counter Value Exposure Time Gain Line Status All Sequencer Set Active Timestamp
Event Reporting	Exposure End Frame Burst Start Frame Burst Start Overtrigger Frame Burst Start Wait Frame Start Frame Start Overtrigger Frame Start Wait
I/O Control and Line Source Signals	Acquisition Trigger Wait / Frame Burst Trigger Wait Debouncer Exposure Active Flash Window Frame Trigger Wait Minimum Output Pulse Width Timer Active User Output
Image Acquisition Control	Acquisition Status Frame Burst Start Trigger Frame Start Trigger Trigger Delay Triggered by Hardware Triggered by Software
Light Control Features	Basler SLP
Miscellaneous	Device Information Parameters Device Temperature Remove Parameter Limits User Defined Values User Sets (Configuration Sets) Vignetting Correction
PGI	Denoising Improved Sharpness
Pixel Formats	Mono 12 Mono 12p (Mono 12 Packed) Mono 8
Standard Features	Auto Function Profile Binning Horizontal Binning Vertical Black Level Digital Shift Exposure Auto Exposure Mode: Timed (Control via API) Gain Gain Auto Gamma Correction Lookup Table (LUT) Region of Interest (ROI) Reverse X (Horizontal Mirroring) Reverse Y (Vertical Mirroring) Sequencer Test Images

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	13.133 mm
	Vertical PhotoActive Area (PAA v)	8.755 mm
	Diagonal PhotoActive Area (PAA diag)	15.784 mm mm
	Image Sensor Resolution	208 line pairs/mm
	Rear Flange Distance	17.526 mm

PIN NUMBER	DESIGNATION	FUNCTION
1	Line 3	General purpose I/O (GPIO) line
2	Line 1	Opto-coupled I/O input line
3	Line 4	General purpose I/O (GPIO) line
4	Line 2	Opto-coupled I/O output line
5	–	Ground for opto-coupled I/O lines
6	–	Ground for General Purpose I/O (GPIO) lines