acA4112-30um

SPECIFICATIONS

Model	acA4112-30um
Part Number	107416
Product Family	ace L
Interface	USB 3.0
Image Sensor	Sony IMX253
COLOR or Monochrome	Monochrome
Optics Format	1.1 inch
Lens Mount	C-mount
Horizontal Pixels	4096
Vertical Pixels	3000
Total Pixels	12.0 MegaPixels
Frame Rate	30 Frames/sec
Electronic Shutter	Global
Pixel Size	3.45 µm
Pixel Depth	10 or 12 bits
Output Formats	Mono 8 Mono 12 Mono 12 Packed
Frame Synchronization	Software trigger Free-run Hardware trigger
Digital Inputs	1
Digital Outputs	1
General Purpose I/O (GPIO)	2
Power Input	Via USB 3.0 interface
Power Consumption	3.6 Watts
Size	35.8 mm x 40 mm x 30 mm
Operating Temperature	0 to 50 C
Mass	80g
Standards Compliance	CE, RoHS, GenICam, IP30, FCC, USB3 Vision, UL, KC, EAC

EMVA Data

EMVA Quantum Efficiency (typical)	70.0 %
Dark Noise (typical)	2.4 electrons
Saturation Capacity (typical)	10,500 electrons
Dynamic Range (typical)	72.8 dB
Signal-to-Noise Ratio (typical)	40.2 dB

Chunks	CRC Checksum Counter Value Exposure Time Gain Line Status All Sequencer Set Active Timestamp
Event Reporting	Critical Temperature Exposure End Frame Burst Start Frame Burst Start Overtrigger Frame Burst Start Wait Frame Start Frame Start Overtrigger Frame Start Wait Over Temperature
I/O Control and Line Source Signals	Acquisition Trigger Wait / Frame Burst Trigger Wait Debouncer Exposure Active Frame Trigger Wait Minimum Output Pulse Width Timer Active User Output
Image Acquisition Control	Acquisition Status Frame Burst Start Trigger Frame Start Trigger Trigger Delay Triggered by Hardware Triggered by Software
Light Control Features	Basler SLP
Miscellaneous	Device Information Parameters Device Temperature Remove Parameter Limits User Defined Values User Sets (Configuration Sets) Vignetting Correction
PGI	Denoising Improved Sharpness
Pixel Formats	Mono 12 Mono 12p (Mono 12 Packed) Mono 8
Standard Features	Auto Function Profile Binning Horizontal Binning Vertical Black Level Digital Shift Exposure Auto Exposure Mode: Timed (Control via API) Exposure Mode: Trigger Width (Control via External Trigger) Gain Gain Auto Gamma Correction Lookup Table (LUT) Region of Interest (ROI) Reverse X (Horizontal Mirroring) Reverse Y (Vertical Mirroring) Sequencer Stacked ROI Test Images Ultra Short Exposure Time Mode

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	14.131 mm
	Vertical PhotoActive Area (PAA v)	10.35 mm
	Diagonal PhotoActive Area (PAA diag)	17.516 mm
	Image Sensor Resolution	145 line pair/mm
	Rear Flange Distance	17.526 mm

PIN NUMBER	DESIGNATION	FUNCTION
1	Line 3	General purpose I/O (GPIO) line
2	Line 1	Opto-coupled I/O input line
3	Line 4	General purpose I/O (GPIO) line
4	Line 2	Opto-coupled I/O output line
5	–	Ground for opto-coupled I/O lines
6	–	Ground for General Purpose I/O (GPIO) lines