acA2500-14um (CS-Mount)

SPECIFICATIONS

Model	acA2500-14um (CS-Mount)
Part Number	106458
Product Family	ace Classic
Interface	USB 3.0
Image Sensor	OnSemi MT9P031
COLOR or Monochrome	Monochrome
Optics Format	1/2.5 inch
Lens Mount	CS-mount
Horizontal Pixels	2592
Vertical Pixels	1944
Total Pixels	5.039 MegaPixels
Frame Rate	14 Frames/sec
Electronic Shutter	Rolling
Pixel Size	2.2 um
Pixel Depth	12 bits
Frame Synchronization	Hardware Trigger Free-Run Mode Software trigger
Exposure Control	Programmable via Camera API Hardware Trigger
Digital Inputs	1
Digital Outputs	1
Power Input	Via USB 3.0 interface
Power Consumption	2.2 Watts
Dimensions	29.3 mm x 29 mm x 29 mm
Operating Temperature	0 to 50 C
Mass	80 g
Standards Compliance	CE, RoHS, GenICam, IP30, UL, FCC, USB3 Vision, KC

EMVA DATA

EMVA Peak Quantum Efficiency	53.0%
Dark Noise	6 electrons
Saturation Capacity	6,400 electrons
Dynamic Range	60.6 dB
Signal-to-Noise Ratio	38.1 dB

Chunks	CRC Checksum Counter Value Exposure Time Gain Line Status All Sequencer Set Active Timestamp
Event Reporting	Exposure End Frame Burst Start Frame Burst Start Overtrigger Frame Burst Start Wait Frame Start Frame Start Overtrigger Frame Start Wait
I/O Control and Line Source Signals	Acquisition Trigger Wait / Frame Burst Trigger Wait Debouncer Exposure Active Flash Window Frame Trigger Wait Minimum Output Pulse Width Timer Active User Output
Image Acquisition Control	Acquisition Start Trigger Acquisition Status Frame Burst Start Trigger Frame Start Trigger Trigger Delay Triggered by Hardware Triggered by Software
Miscellaneous	Device Information Parameters Remove Parameter Limits User Defined Values User Sets (Configuration Sets)
Pixel Formats	Mono 12 Mono 8
Standard Features	Auto Function Profile Binning Horizontal Binning Vertical Black Level Digital Shift Exposure Auto Exposure Mode: Timed (Control via API) Gain Gain Auto Gamma Correction Lookup Table (LUT) Region of Interest (ROI) Reverse X (Horizontal Mirroring) Sequencer Test Images

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	5.702 mm
	Vertical PhotoActive Area (PAA v)	4.277 mm
	Diagonal PhotoActive Area (PAA diag)	7.128 mm
	Image Sensor Resolution	227 line pairs/mm
	Rear Flange Distance	12.526 mm

PIN	DESIGNATION	FUNCTION
1	Line 3	General purpose I/O (GPIO) line
2	Line 1	Opto-coupled I/O input line
3	Line 4	General purpose I/O (GPIO) line
4	Line 2	Opto-coupled I/O output line
5	–	Ground for opto-coupled I/O lines
6	–	Ground for General Purpose I/O (GPIO) line