acA2440-20gc

Color High-Speed Industrial CMOS Camera

  • 2/3 inch Optical Format

  • 23 frames/sec

  • Sony IMX264 CMOS Sensor

  • Global Electronic Shutter

$ 899.00

SPECIFICATIONS

Model acA2440-20gc
Part Number 107213
Product Family ace U
Interface GigE
Image Sensor Sony IMX264
COLOR or Monochrome Color
Optics Format 2/3 inch
Lens Mount C-mount
Horizontal Pixels 2448
Vertical Pixels 2048
Total Pixels 5.014 MegaPixels
Frame Rate 23 fps
Electronic Shutter Global
Pixel Size 3.45 um
Pixel Depth 10 or 12 bits
Frame Synchronization Software trigger
Hardware trigger
Free-run
Exposure Control Programmable via Camera API
Hardware Trigger
Pixel Formats Bayer 12
Bayer 12p (Bayer 12 Packed)
Bayer 8
Mono 8
YCbCr422_8 (YUV422_8)
Digital Inputs 1
Digital Outputs 1
General Purpose I/O (GPIO) 1
Power Input POE or 12-24 VDC 
Power Consumption 2.8 Watts
Power Consumption PoE 3.3 Watts
Dimensions 42 mm x 29 mm x 29 mm
Operating Temperature 0 to 50 C
Mass 90 g
Standards Compliance CE, RoHS, GenICam, GigE Vision, IP30, FCC, UL, KC

 

FEATURES

Chunks
  • CRC Checksum
  • Exposure Time
  • Frame Counter
  • Gain Raw
  • Line Status All
  • Sequence Set Index
  • Timestamp
  • Trigger Input Counter
Color Creation and Enhancement
  • Balance White (Manual White Balance)
  • Balance White Auto (Automatic White Balance)
  • Color Adjustment (6-axis Hue/Saturation)
  • Color Transformation (RGB to RGB)
  • Light Source Presets
  • sRGB Gamma Correction
Event Reporting
  • Acquisition Start
  • Acquisition Start Overtrigger
  • Acquisition Start Wait
  • Critical Temperature
  • Exposure End
  • Frame Start
  • Frame Start Overtrigger
  • Over Temperature
GigE Vision 2.0
  • Action Commands (Synchronous Triggering)
  • Precision Time Protocol (IEEE 1588)
  • Scheduled Action Commands
I/O Control and Line Source Signals
  • Acquisition Trigger Wait / Frame Burst Trigger Wait
  • Exposure Active
  • Frame Trigger Wait
  • Timer Active
  • User Output
Image Acquisition Control
  • Acquisition Start Trigger
  • Acquisition Status
  • Frame Start Trigger
  • Trigger Delay
  • Triggered by Hardware
  • Triggered by Software
Light Control Features
  • Basler SLP
Miscellaneous
  • Device Information Parameters
  • Device Temperature
  • Remove Parameter Limits
  • User Defined Values
  • User Sets (Configuration Sets)
PGI
  • 5×5 Debayering
  • Color-Anti-Aliasing
  • Denoising
  • Improved Sharpness
Pixel Formats
  • Bayer 12
  • Bayer 12p (Bayer 12 Packed)
  • Bayer 8
  • Mono 8
  • YCbCr422_8 (YUV422_8)
Standard Features
  • Auto Function Profile
  • Black Level
  • Digital Shift
  • Exposure Auto
  • Exposure Mode: Trigger Width (Control via External Trigger)
  • Gain
  • Gain Auto
  • Gamma Correction
  • Lookup Table (LUT)
  • Region of Interest (ROI)
  • Reverse X (Horizontal Mirroring)
  • Reverse Y (Vertical Mirroring)
  • Sequencer
  • Test Images
  • Ultra Short Exposure Time Mode

OPTICS

OPTICS PARAMETERS

Horizontal PhotoActive Area (PAA h) 8.446 mm
Vertical PhotoActive Area (PAA v) 7.066 mm
Diagonal PhotoActive Area (PAA diag) 11.011 mm
Image Sensor Resolution 145 line pairs/mm
Rear Flange Distance 17.526 mm

 

MECHANICAL & I/O Pinout

Case Type  Metal Shielded Box
Case Size (L x W x H) 42 mm x 29 mm x 29 mm
Mass 90g

6-PIN HIROSE CONNECTOR PINOUT

PIN DESIGNATION FUNCTION
1 – 12-24 VDC camera power
2 Line 1 Opto-coupled I/O input line
3 Line 3 General purpose I/O (GPIO) line
4 Line 2 Opto-coupled I/O output line
5 – Ground for opto-coupled I/O lines
6 – Ground for camera power and GPIO lines

Basler ace GigE C-Mount v01

Basler Ace GigE Mechanical Drawing (131 KB)
Shopping Cart
Scroll to Top