acA2040-90uc

SPECIFICATIONS

Model	acA2040-90uc
Part Number	106542
Product Family	ace Classic
Interface	USB 3.0
Image Sensor	CMOSIS (ams) CMV4000
COLOR or Monochrome	Color
Optics Format	1 inch
Lens Mount	C-mount
Horizontal Pixels	2040
Vertical Pixels	2046
Total Pixels	4.174 MegaPixels
Frame Rate	90 Frames/sec
Electronic Shutter	Global
Pixel Size	5.5 um
Pixel Depth	10, 12 bits
Frame Synchronization	Hardware Trigger Free-Run Mode Software trigger
Exposure Control	Programmable via Camera API Hardware Trigger
Digital Inputs	1
Digital Outputs	1
Power Input	Via USB 3.0 interface
Power Consumption	3.2 Watts
Dimensions	29.3 mm x 29 mm x 29 mm
Operating Temperature	0 to 60 C
Mass	80 g
Standards Compliance	CE, RoHS, GenICam, IP30, FCC, USB3 Vision, UL, KC

EMVA DATA

EMVA Peak Quantum Efficiency	62.1%
Dark Noise	13.8 electrons
Saturation Capacity	11,900electrons
Dynamic Range	58.7 dB
Signal-to-Noise Ratio	40.8dB

Chunks	CRC Checksum Counter Value Exposure Time Gain Line Status All Sequencer Set Active Timestamp
Color Creation and Enhancement	Balance White (Manual White Balance) Balance White Auto (Automatic White Balance) Light Source Presets
Event Reporting	Exposure End Frame Burst Start Frame Burst Start Overtrigger Frame Burst Start Wait Frame Start Frame Start Overtrigger Frame Start Wait
I/O Control and Line Source Signals	Acquisition Trigger Wait / Frame Burst Trigger Wait Debouncer Frame Trigger Wait Minimum Output Pulse Width Timer Active User Output
Image Acquisition Control	Acquisition Start Trigger Acquisition Status Frame Burst Start Trigger Frame Start Trigger Trigger Delay Triggered by Hardware Triggered by Software
Miscellaneous	Device Information Parameters Remove Parameter Limits User Defined Values User Sets (Configuration Sets)
Pixel Formats	Bayer 12 Bayer 8
Standard Features	Auto Function Profile Black Level Decimation Vertical Exposure Auto Exposure Mode: Timed (Control via API) Exposure Mode: Trigger Width (Control via External Trigger) Gain Gain Auto Gamma Correction Lookup Table (LUT) Region of Interest (ROI) Reverse X (Horizontal Mirroring) Reverse Y (Vertical Mirroring) Sequencer Test Images

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	11.22 mm
	Vertical PhotoActive Area (PAA v)	11.253 mm
	Diagonal PhotoActive Area (PAA diag)	15.891 mm
	Image Sensor Resolution	91 line pairs/mm
	Rear Flange Distance	17.526 mm

PIN NUMBER	DESIGNATION	FUNCTION
1	Line 3	General purpose I/O (GPIO) line
2	Line 1	Opto-coupled I/O input line
3	Line 4	General purpose I/O (GPIO) line
4	Line 2	Opto-coupled I/O output line
5	–	Ground for opto-coupled I/O lines
6	–	Ground for General Purpose I/O (GPIO) lines