acA2040-25gmNIR

SPECIFICATIONS

Model	acA2040-25gmNIR
Part Number	106160
Product Family	ace Classic
Interface	GigE Vision
Image Sensor	CMOSIS CMV4000 NIR-enhanced
COLOR or Monochrome	Monochrome
Optics Format	1 inch
Lens Mount	C-mount
Horizontal Pixels	2048
Vertical Pixels	2048
Total Pixels	4 MegaPixels
Frame Rate	25 Frames/sec
Electronic Shutter	Global
Pixel Size	5.5 µm
Pixel Depth	12 bits
Frame Synchronization	Hardware trigger Free-run Ethernet connection
Exposure Control	Programmable via the camera API Hardware trigger
Digital Inputs	1
Digital Outputs	1
Power Input	PoE or 12 VDC
Power Consumption	2.6 Watts (3.1 Watts POE)
Dimensions	42 mm x 29 mm x 29 mm
Operating Temperature	0 to 50 C
Mass	90g
Standards Compliance	CE, RoHS, GenICam, GigE Vision, IP30, UL, FCC, IEEE 802.3af (PoE), KC, EAC

EMVA DATA

EMVA Peak Quantum Efficiency	61.9 %
Dark Noise	14.0 electrons
Saturation Capacity	12.400 electrons
Dynamic Range	59.0 dB
Signal-to-Noise Ratio	40.9 dB

Chunks	CRC Checksum Exposure Time Frame Counter Line Status All Sequence Set Index Timestamp Trigger Input Counter
Event Reporting	Acquisition Start Acquisition Start Overtrigger Exposure End Frame Start Frame Start Overtrigger
I/O Control and Line Source Signals	Acquisition Trigger Wait / Frame Burst Trigger Wait Exposure Active Frame Trigger Wait Timer Active User Output
Image Acquisition Control	Acquisition Start Trigger Acquisition Status Frame Burst Start Trigger Frame Start Trigger Trigger Delay Triggered by Hardware Triggered by Software
Miscellaneous	Device Information Parameters Remove Parameter Limits User Defined Values User Sets (Configuration Sets)
Pixel Formats	Mono 12 Mono 12p (Mono 12 Packed) Mono 8 YCbCr422_8 (YUV422_8)
Standard Features	Auto Function Profile Binning Horizontal Binning Vertical Black Level Decimation Vertical Digital Shift Exposure Auto Exposure Mode: Trigger Width (Control via External Trigger) Gain Gain Auto Gamma Correction Lookup Table (LUT) Region of Interest (ROI) Reverse X (Horizontal Mirroring) Reverse Y (Vertical Mirroring) Sequencer Stacked Zones Imaging Test Images

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	11.264 mm
	Vertical PhotoActive Area (PAA v)	11.264 mm
	Diagonal PhotoActive Area (PAA diag)	15.93 mm
	Image Sensor Resolution	91 lp/mm
	Rear Flange Distance	17.526 mm

PIN	DESIGNATION	FUNCTION
1	–	12 VDC camera power
2	Line 1	Opto-coupled I/O input line
3	–	Not connected
4	Out 1	Opto-coupled I/O output line
5	–	Ground for opto-coupled I/O lines
6	–	Ground for camera power