acA1920-25gm

SPECIFICATIONS

Model	acA1920-25gm
Part Number	106493
Product Family	ace Classic
Interface	GigE Vision
Image Sensor	OnSemi MT9P031
COLOR or Monochrome	Monochrome
Optics Format	1/3.5 inch
Lens Mount	C-mount
Horizontal Pixels	1920
Vertical Pixels	1080
Total Pixels	2.074 MegaPixels
Frame Rate	25 Frames/sec
Electronic Shutter	Rolling
Pixel Size	2.2 um
Pixel Depth	12 bits
Frame Synchronization	Hardware Trigger Free-Run Mode Ethernet Connection
Exposure Control	Programmable via Camera API Hardware trigger
Digital Inputs	1
Digital Outputs	1
Power Input	PoE or 12 VDC
Power Consumption	2.2 Watts
Power Consumption PoE	2.7 Watts
Dimensions	42 mm x 29 mm x 29 mm
Operating Temperature	0 to 50 C
Mass	90 g
Standards Compliance	CE, RoHS, GenICam, GigE Vision, IP30, UL, FCC, IEEE 802.3af (PoE), KC

EMVA DATA

EMVA Peak Quantum Efficiency	57.2%
Dark Noise	6.4 electrons
Saturation Capacity	6,700 electrons
Dynamic Range	60.3 dB
Signal-to-Noise Ratio	38.3 dB

Chunks	CRC Checksum Exposure Time Frame Counter Line Status All Sequence Set Index Timestamp Trigger Input Counter
Event Reporting	Acquisition Start Acquisition Start Overtrigger Exposure End Frame Start Frame Start Overtrigger
I/O Control and Line Source Signals	Acquisition Trigger Wait / Frame Burst Trigger Wait Exposure Active Flash Window Frame Trigger Wait Timer Active User Output
Image Acquisition Control	Acquisition Start Trigger Acquisition Status Frame Burst Start Trigger Frame Start Trigger Trigger Delay Triggered by Hardware Triggered by Software
Miscellaneous	Device Information Parameters Remove Parameter Limits User Defined Values User Sets (Configuration Sets)
Pixel Formats	Mono 12 Mono 12p (Mono 12 Packed) Mono 8 YCbCr422_8 (YUV422_8)
Standard Features	Auto Function Profile Binning Horizontal Binning Vertical Black Level Digital Shift Exposure Auto Gain Gain Auto Gamma Correction Lookup Table (LUT) Region of Interest (ROI) Reverse X (Horizontal Mirroring) Sequencer Test Images

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	4.224 mm
	Vertical PhotoActive Area (PAA v)	2.376 mm
	Diagonal PhotoActive Area (PAA diag)	4.846 mm
	Image Sensor Resolution	227 line pairs/mm
	Rear Flange Distance	17.526 mm

PIN	DESIGNATION	FUNCTION
1	–	12 VDC camera power
2	Line 1	Opto-coupled I/O input line
3	–	Not connected
4	Out 1	Opto-coupled I/O output line
5	–	Ground for opto-coupled I/O lines
6	–	Ground for camera power