acA1300-200um

SPECIFICATIONS

Model	acA1300-200um
Part Number	106752
Product Family	ace U
Interface	USB 3.0
Image Sensor	OnSemi PYTHON 1300
COLOR or Monochrome	Monochrome
Optics Format	1/2 – inch
Lens Mount	C-mount
Horizontal Pixels	1280
Vertical Pixels	1024
Total Pixels	1.311 MegaPixels
Frame Rate	203 frames/sec
Electronic Shutter	Global
Pixel Size	4.80 um
Pixel Depth	10 bits
Frame Synchronization	Software Trigger Hardware Trigger Free-Run
Exposure Control	Programmable via Camera API Hardware Trigger
Pixel Formats	Mono 10 Mono 10p (Mono 10 Packed) Mono 8
Digital Inputs	1
Digital Outputs	1
General Purpose I/O (GPIO)	2
Power Input	Via USB 3.0 Interface
Power Consumption	3 Watts
Dimensions	29.3 mm x 29 mm x 29 mm
Operating Temperature	0 to 50 C
Mass	80 g
Standards Compliance	CE, RoHS, GenICam, IP30, FCC, USB3 Vision, UL, KC

EMVA DATA

EMVA Peak Quantum Efficiency	53.0 %
Dark Noise	10.6 electrons
Saturation Capacity	6,900 electrons
Dynamic Range	56.3 dB
Signal-to-Noise Ratio	38.4 dB

Chunks	CRC Checksum Counter Value Exposure Time Gain Line Status All Sequencer Set Active Timestamp
Event Reporting	Critical Temperature Exposure End Frame Burst Start Frame Burst Start Overtrigger Frame Burst Start Wait Frame Start Frame Start Overtrigger Frame Start Wait Over Temperature
I/O Control and Line Source Signals	Acquisition Trigger Wait / Frame Burst Trigger Wait Debouncer Exposure Active Frame Trigger Wait Minimum Output Pulse Width Timer Active User Output
Image Acquisition Control	Acquisition Start Trigger Acquisition Status Frame Burst Start Trigger Frame Start Trigger Trigger Delay Triggered by Hardware Triggered by Software
Light Control Features	Basler SLP
Miscellaneous	Device Information Parameters Device Temperature Remove Parameter Limits User Defined Values User Sets (Configuration Sets)
PGI	Denoising Improved Sharpness
Pixel Formats	Mono 10 Mono 10p (Mono 10 Packed) Mono 8
Standard Features	Auto Function Profile Binning Horizontal Binning Vertical Black Level Exposure Auto Exposure Mode: Timed (Control via API) Exposure Mode: Trigger Width (Control via External Trigger) Gain Gain Auto Gamma Correction Lookup Table (LUT) Region of Interest (ROI) Reverse X (Horizontal Mirroring) Reverse Y (Vertical Mirroring) Sequencer Stacked ROI Test Images

OPTICS PARAMETERS

	Horizontal PhotoActive Area (PAA h)	6.144 mm
	Vertical PhotoActive Area (PAA v)	4.915 mm
	Diagonal PhotoActive Area (PAA diag)	7.868 mm mm
	Image Sensor Resolution	104 line pairs/mm
	Rear Flange Distance	17.526 mm

PIN NUMBER	DESIGNATION	FUNCTION
1	Line 3	General purpose I/O (GPIO) line
2	Line 1	Opto-coupled I/O input line
3	Line 4	General purpose I/O (GPIO) line
4	Line 2	Opto-coupled I/O output line
5	–	Ground for opto-coupled I/O lines
6	–	Ground for General Purpose I/O (GPIO) lines