a2A640-240gmSWIR

The Basler a2A640-240umSWIR USB 3.0 camera with the Sony IMX991 SenSWIR InGaAs Image sensor delivers 240 frames per second at VGA (640×480) resolution.

 

$ 7,898.00

SPECIFICATIONS

Model a2A640-240umSWIR
Part Number 108807
Product Family ace 2 X
Interface USB 3.0
Image Sensor Sony IMX991
Image Sensor Type InGaAs SWIR 
COLOR or Monochrome Monochrome
Spectral Range Visible + SWIR (0.4 µm ~ 1.7 µm)
Optics Format 1/4 inch
Image Sensor PhotoActive Diagonal 4.185 mm
Lens Mount C-mount
Horizontal Pixels 656
Vertical Pixels 520
Total Pixels 0.34 MegaPixels
Frame Rate 270 fps
Electronic Shutter Global
Pixel Size 5.00 µm
Pixel Depth 8/10/12 bits
Pixel Formats Mono 10, Mono 10p, Mono 12, Mono 12p, Mono 8
Frame Synchronization Free-run
Hardware trigger
Software trigger
Exposure Control Programmable via the camera API
Hardware trigger
Digital Inputs 1 Opto-Isolated Input line
General Purpose I/O (GPIO) 2 General Purpose I/O (GPIO) lines
Power Input 5.0 VDC
Power Consumption 2.8 Watts
Dimensions 42.8 mm x 29 mm x 29 mm
Operating Temperature 0 to 50°C
Mass 85 g
Standards Compliance

CE, EAC, GenICam, IP30
KC, RoHS, UL (in preparation), USB3 Vision

FEATURES

Chunks
Auto Brightness Status
CRC Checksum
Counter Value
Exposure Time
Frame ID
Gain
Line Status All
Timestamp
Timestamp Value
Color Creation and Enhancement
Brightness and Contrast
Event Reporting
Action Late
Exposure End
Frame Buffer Overrun
Frame Start
Frame Trigger Missed
Overrun
Temperature Status Changed
Test
GigE Vision 2.0
Action Commands (Synchronous Triggering)
Precision Time Protocol (IEEE 1588)
Scheduled Action Commands
I/O Control
Input Filter
Image Acquisition Control
Acquisition Frame Rate
Acquisition Mode
Acquisition Start, Stop, and Abort
Acquisition Status
Exposure Active Trigger
Exposure End Trigger
Exposure Start Delay
Exposure Start Trigger
Frame Active Trigger
Frame Burst Active Trigger
Frame Burst End Trigger
Frame Burst Start Trigger
Frame End Trigger
Frame Start Trigger
Sensor Readout Time
Trigger Delay
Triggered by Hardware
Triggered by Software
Line Source Signals
Counter Active
Exposure Active
Frame Burst Active
Frame Burst Trigger Wait
Frame Trigger Wait
Serial Tx
Timer 1 Active, Timer 2 Active
User Output 1, 2, and 3
Miscellaneous
Device Information Parameters
Device Temperature
Periodic Signal
Sensor Bit Depth
Sensor State
Temperature State
User Sets (Configuration Sets)
User-Defined Values
Pixel Formats
Mono 10
Mono 10p
Mono 12
Mono 12p
Mono 8
Standard Features
Auto Function Profile
Binning
Black Level
Center X and Center Y
Counter
Digital Shift
Exposure Auto
Exposure Mode: Timed
Exposure Mode: Trigger Controlled
Exposure Mode: Trigger Width
Exposure Time
Gain
Gain Auto
Gamma Correction
Image ROI (Region of Interest)
Lookup Table (LUT)
Multiple ROI
Reverse X (Horizontal Mirroring)
Reverse Y (Vertical Mirroring)
Test Patterns
Timer

OPTICS

OPTICS PARAMETERS






 Horizontal PhotoActive Area (PAA h) 3.280 mm
Vertical PhotoActive Area (PAA v) 2.600 mm
Diagonal PhotoActive Area (PAA diag) 4.185 mm
Image Sensor Resolution 100 line pairs/mm
Rear Flange Distance 17.526 mm

 

MECHANICAL & I/O Pinout

Case Type  Metal Shielded Box
Case Size (L x W x H) 42.8 mm x 29 mm x 29 mm
Mass 85 g

6-PIN M8 FEMALE CONNECTOR PINOUT

PIN DESIGNATION FUNCTION
1 – Reserved. Do Not Connect.
2 Line 1 Opto-coupled I/O input line
3 – Ground for opto-coupled I/O lines
4 Line 2 General purpose I/O (GPIO) line
5 Line 3 General purpose I/O (GPIO) line
6 – Ground for General Purpose I/O (GPIO) lines
Basler ace 2 USB3

 

Basler Ace2 USB3 Technical Drawing (128 KB)

Quantum Efficiency

Shopping Cart
Scroll to Top