a2A5320-7gmPRO

SONY Pregius 16.1 MB Image Sensor

  • 1.1 inch Optical Format
  • 7 frames.sec
  • Global Electronic Shutter
  • Convenient & Robust M8 I/O Connector

$ 1,689.00

SPECIFICATIONS

Model a2A5320-7gmPRO
Part Number 108177
Product Family ace 2 Pro
Interface GigE
Image Sensor Sony IMX542
COLOR or Monochrome Monochrome
Optics Format 1.1 inch
Lens Mount C-mount
Horizontal Pixels 5320
Vertical Pixels 3032
Total Pixels 16.1 MegaPixels
Frame Rate 7 fps
Electronic Shutter Global
Pixel Size 2.74 µm
Pixel Depth 8/10/12 bits
Pixel Formats Mono 8
Mono 10
Mono 10p
Mono 12
Mono 12p
Frame Synchronization Free-run
Hardware trigger
Software trigger
Exposure Control Programmable via the camera API
Hardware trigger
Digital Inputs 1
General Purpose I/O (GPIO) 2
Power Input PoE or 12-24 VDC
Power Consumption 3.7 Watts
Dimensions 55.5 mm x 29 mm x 29 mm
Operating Temperature 0 C to 50 C
Mass 105g
Standards Compliance RoHS, CE, IP30, GigE Vision 2.0, FCC, UL (in preparation) GenICame, KC, EAC

EMVA DATA

EMVA Quantum Efficiency (typical) 65.9 %
Dark Noise 2.2 electrons
Saturation Capacity 9,700 electrons
Dynamic Range 70.9 dB
Signal-to-Noise Ratio 39.9 dB

FEATURES

Beyond Features
  • Compression Beyond
  • Pixel Beyond
Chunks
  • Auto Brightness Status
  • CRC Checksum
  • Counter Value
  • Exposure Time
  • Frame ID
  • Gain
  • Line Status All
  • Timestamp
Color Creation and Enhancement
  • Brightness
  • Contrast Enhancement
Event Reporting
  • Action Late
  • Exposure End
  • Frame Buffer Overrun
  • Frame Start
  • Frame Trigger Missed
  • Overrun
  • Temperature Status Changed
  • Test
GigE Vision 2.0
  • Action Commands (Synchronous Triggering)
  • Precision Time Protocol (IEEE 1588)
  • Scheduled Action Commands
I/O Control and Line Source Signals
  • Acquisition Trigger Wait / Frame Burst Trigger Wait
  • Exposure Active
  • Frame Trigger Wait
  • Input Filter
  • Serial Communication (UART)
  • Timer Active
  • User Output
Image Acquisition Control
  • Acquisition Abort
  • Acquisition Single Frame
  • Acquisition Start
  • Acquisition Status
  • Acquisition Stop
  • Frame Burst Start Trigger
  • Frame Start Trigger
  • High Speed Burst Mode
  • Trigger Delay
  • Triggered by Hardware
  • Triggered by Software
Miscellaneous
  • Device Information Parameters
  • Device Temperature
  • User Defined Values
  • User Sets (Configuration Sets)
PGI
  • Denoising
  • Improved Sharpness
Pixel Formats
  • Mono 10
  • Mono 10p (Mono 10 Packed)
  • Mono 12
  • Mono 12p (Mono 12 Packed)
  • Mono 8
Standard Features
  • 12Bit Lookup Table (LUT)
  • Auto Function Profile
  • Binning Horizontal
  • Binning Vertical
  • Black Level
  • Digital Shift
  • Exposure Auto
  • Exposure Mode: Timed (Control via API)
  • Exposure Mode: Trigger Width (Control via External Trigger)
  • Exposure Time
  • Gain
  • Gain Auto
  • Gamma Correction
  • Multiple ROI
  • Region of Interest (ROI)
  • Reverse X (Horizontal Mirroring)
  • Reverse Y (Vertical Mirroring)
  • Test Patterns
  • Ultra Short Exposure Time Mode

OPTICS

OPTICS PARAMETERS






 Horizontal PhotoActive Area (PAA h) 14.577 mm
Vertical PhotoActive Area (PAA v) 8.308 mm
Diagonal PhotoActive Area (PAA diag) 16.778 mm
Image Sensor Resolution 183 line pairs/mm
Rear Flange Distance 17.526 mm

 

MECHANICAL & I/O Pinout

Case Type  Metal Shielded Box
Case Size (L x W x H) 55.5 mm x 29 mm x 29 mm
Mass 105g

6-PIN M8 FEMALE CONNECTOR PINOUT

PIN DESIGNATION FUNCTION
1 – 12 VDC camera power
2 Line 1 Opto-coupled I/O input line
3 – Ground for opto-coupled I/O lines
4 Line 2 General purpose I/O (GPIO) line
5 Line 3 General purpose I/O (GPIO) line
6 – Ground for camera power and General Purpose I/O (GPIO) lines
Basler ace 2 GigE

 

Basler Ace2 GigE Mechanical Drawing (192 KB)
Shopping Cart
Scroll to Top