a2A5320-34g5mBAS

SONY Pregius 16.1 MPixel MonochromeImage Sensor

  • 1.1 inch Optical Format
  • 34 frames.sec
  • Global Electronic Shutter
  • Convenient & Robust M8 I/O Connector

$ 2,249.00

SPECIFICATIONS

Model a2A5320-34g5mBAS
Part Number 108635
Product Family ace 2 Basic
Interface 5 GigE
Image Sensor Sony IMX542
COLOR or Monochrome Color
Optics Format 1.1 inch
Lens Mount C-mount
Horizontal Pixels 5320
Vertical Pixels 3032
Total Pixels 16.1 MegaPixels
Frame Rate 34 fps
Electronic Shutter Global
Pixel Size 2.74 µm
Pixel Depth 8/10/12 bits
Pixel Formats Free-run
Hardware trigger
Software trigger
Frame Synchronization Programmable via the camera API
Hardware trigger
Exposure Control
Mono 10
Mono 10p
Mono 12
Mono 12p
Mono 8
RGB 8
Digital Inputs 1
General Purpose I/O (GPIO) 2
Power Input 12-24 VDC
Power Consumption 3.6 Watts
Dimensions 55.5 mm x 29 mm x 29 mm
Operating Temperature -10 C to 50 C
Mass 100g
Standards Compliance RoHS, CE, IP30, GigE Vision 2.0, FCC, UL (in preparation), GenICam, KC, EAC

EMVA DATA

EMVA Quantum Efficiency (typical) 65.9 %
Dark Noise 2.2 electrons
Saturation Capacity 9,700 electrons
Dynamic Range 70.9 dB
Signal-to-Noise Ratio 39.9 dB

FEATURES

Chunks
  • Auto Brightness Status
  • CRC Checksum
  • Counter Value
  • Exposure Time
  • Frame ID
  • Gain
  • Line Status All
  • Timestamp
  • Timestamp Value
Color Creation and Enhancement
  • Brightness and Contrast
Event Reporting
  • Action Late
  • Exposure End
  • Frame Buffer Overrun
  • Frame Start
  • Frame Trigger Missed
  • Overrun
  • Temperature Status Changed
  • Test
GigE Vision 2.0
  • Action Commands (Synchronous Triggering)
  • Precision Time Protocol (IEEE 1588)
  • Scheduled Action Commands
I/O Control
  • Input Filter
Image Acquisition Control
  • Acquisition Frame Rate
  • Acquisition Mode
  • Acquisition Start, Stop, and Abort
  • Acquisition Status
  • Exposure Active Trigger
  • Exposure End Trigger
  • Exposure Start Delay
  • Exposure Start Trigger
  • Frame Active Trigger
  • Frame Burst Active Trigger
  • Frame Burst End Trigger
  • Frame Burst Start Trigger
  • Frame End Trigger
  • Frame Start Trigger
  • Sensor Readout Time
  • Trigger Delay
  • Triggered by Hardware
  • Triggered by Software
Line Source Signals
  • Counter Active
  • Exposure Active
  • Frame Burst Active
  • Frame Burst Trigger Wait
  • Frame Trigger Wait
  • Serial Tx
  • Timer 1 Active, Timer 2 Active
  • User Output 1, 2, and 3
Miscellaneous
  • Device Information Parameters
  • Device Temperature
  • Periodic Signal
  • Sensor Bit Depth
  • Sensor State
  • Temperature State
  • User Sets (Configuration Sets)
  • User-Defined Values
Pixel Formats
  • Mono 10
  • Mono 10p
  • Mono 12
  • Mono 12p
  • Mono 8
Standard Features
  • Auto Function Profile
  • Binning
  • Black Level
  • Center X and Center Y
  • Counter
  • Digital Shift
  • Exposure Auto
  • Exposure Mode: Timed
  • Exposure Mode: Trigger Controlled
  • Exposure Mode: Trigger Width
  • Exposure Time
  • Gain
  • Gain Auto
  • Gamma Correction
  • Image ROI (Region of Interest)
  • Lookup Table (LUT)
  • Multiple ROI
  • Reverse X (Horizontal Mirroring)
  • Reverse Y (Vertical Mirroring)
  • Test Patterns
  • Timer

OPTICS

OPTICS PARAMETERS






 Horizontal PhotoActive Area (PAA h) 14.577 mm
Vertical PhotoActive Area (PAA v) 8.308 mm
Diagonal PhotoActive Area (PAA diag) 16.778 mm
Image Sensor Resolution 183 line pairs/mm
Rear Flange Distance 17.526 mm

 

MECHANICAL & I/O Pinout

Case Type  Metal Shielded Box
Case Size (L x W x H) 55.5 mm x 29 mm x 29 mm
Mass 100g

6-PIN M8 FEMALE CONNECTOR PINOUT

PIN DESIGNATION FUNCTION
1 – 12 VDC camera power
2 Line 1 Opto-coupled I/O input line
3 – Ground for opto-coupled I/O lines
4 Line 2 General purpose I/O (GPIO) line
5 Line 3 General purpose I/O (GPIO) line
6 – Ground for camera power and General Purpose I/O (GPIO) lines
Basler ace 2 GigE

 

Basler Ace2 GigE Mechanical Drawing (192 KB)
Shopping Cart
Scroll to Top