a2A4504-18umPRO

20.2 MPixel Monochrome Industrial Camera

  • 1.1 inch Optics Format

  • Square Aspect Ratio

  • 18 frames/sec

  • Global Electronic Shutter

  • Convenient & Robust M8 I/O Connector

$ 2,149.00

SPECIFICATIONS

Model a2A4504-18umPRO
Part Number 108165
Product Family ace 2 PRO
Interface USB 3.0
Image Sensor Sony IMX541
COLOR or Monochrome Monochrome
Optics Format 1.1 inch
Lens Mount C-mount
Horizontal Pixels 4504
Vertical Pixels 4504
Total Pixels 20.2 MegaPixels
Frame Rate 18 fps
Electronic Shutter Global
Pixel Size 2.74 µm
Pixel Depth 8/10/12 bits
Frame Synchronization Free-run
Hardware trigger
Software trigger
Exposure Control Programmable via the camera API
Hardware trigger
Pixel Formats Mono 8
Mono 10
Mono 10p
Mono 12
Mono 12p
Digital Inputs 1
General Purpose I/O (GPIO) 2
Power Input Via USB 3.0 interface or 12-24 VDC
Power Consumption 4.0 Watts
Dimensions 42.8 mm x 29 mm x 29 mm
Operating Temperature 0 to 50°C
Mass 90g
Standards Compliance RoHS, CE, IP30, FCC, GenICam, USB3 Vision, KC, EAC, UL

EMVA DATA

EMVA Peak Quantum Efficiency (typical) 65.9 %
Dark Noise 2.1 electrons
Saturation Capacity 9,400 electrons
Dynamic Range 70.8 dB
Signal-to-Noise Ratio 39.7 dB

FEATURES

Beyond Features
  • Compression Beyond
  • Pixel Beyond
Chunks
  • Auto Brightness Status
  • CRC Checksum
  • Counter Value
  • Exposure Time
  • Frame ID
  • Gain
  • Line Status All
  • Timestamp
Color Creation and Enhancement
  • Brightness
  • Contrast Enhancement
Event Reporting
  • Action Late
  • Exposure End
  • Frame Buffer Overrun
  • Frame Start
  • Frame Trigger Missed
  • Overrun
  • Temperature Status Changed
  • Test
I/O Control and Line Source Signals
  • Acquisition Trigger Wait / Frame Burst Trigger Wait
  • Exposure Active
  • Frame Trigger Wait
  • Input Filter
  • Serial Communication (UART)
  • Timer Active
  • User Output
Image Acquisition Control
  • Acquisition Abort
  • Acquisition Single Frame
  • Acquisition Start
  • Acquisition Status
  • Acquisition Stop
  • Frame Burst Start Trigger
  • Frame Start Trigger
  • High Speed Burst Mode
  • Trigger Delay
  • Triggered by Hardware
  • Triggered by Software
Miscellaneous
  • Device Information Parameters
  • Device Temperature
  • User Defined Values
  • User Sets (Configuration Sets)
PGI
  • Denoising
  • Improved Sharpness
Pixel Formats
  • Mono 10
  • Mono 10p (Mono 10 Packed)
  • Mono 12
  • Mono 12p (Mono 12 Packed)
  • Mono 8
Standard Features
  • 12Bit Lookup Table (LUT)
  • Auto Function Profile
  • Binning Horizontal
  • Binning Vertical
  • Black Level
  • Digital Shift
  • Exposure Auto
  • Exposure Mode: Timed (Control via API)
  • Exposure Mode: Trigger Width (Control via External Trigger)
  • Exposure Time
  • Gain
  • Gain Auto
  • Gamma Correction
  • Multiple ROI
  • Region of Interest (ROI)
  • Reverse X (Horizontal Mirroring)
  • Reverse Y (Vertical Mirroring)
  • Test Patterns
  • Ultra Short Exposure Time Mode

OPTICS

OPTICS PARAMETERS






 Horizontal PhotoActive Area (PAA h) 12.341 mm
Vertical PhotoActive Area (PAA v) 12.341 mm
Diagonal PhotoActive Area (PAA diag) 17.453 mm
Image Sensor Resolution 183 line pairs/mm
Rear Flange Distance 17.526 mm

 

MECHANICAL & I/O Pinout

Case Type  Metal Shielded Box
Case Size (L x W x H) 42.8 mm x 29 mm x 29 mm
Mass 90g

6-PIN M8 FEMALE CONNECTOR PINOUT

PIN DESIGNATION FUNCTION
1 – 24 VDC camera power
2 Line 1 Opto-coupled I/O input line
3 – Ground for opto-coupled I/O lines
4 Line 2 General purpose I/O (GPIO) line
5 Line 3 General purpose I/O (GPIO) line
6 – Ground for camera power and General Purpose I/O (GPIO) lines
Basler ace USB3 C-Mount v02
Basler Ace2 USB3 Technical Drawing (128 KB)
Shopping Cart
Scroll to Top