a2A4200-12gmPRO

Gpixel 9 MegaPixel Monochrome Image Sensor

  • 2/3 inch Optical Format

  • 12 frames/sec

  • Global Electronic Shutter

  • Convenient & Robust M8 I/O Connector

$ 919.00

SPECIFICATIONS

Model a2A4200-12gmPRO
Part Number 108360
Product Family ace 2 Pro
Interface GigE
Image Sensor Gpixel GMAX2509
COLOR or Monochrome Monochrome
Optics Format 2/3 inch
Lens Mount C-mount
Horizontal Pixels 4200
Vertical Pixels 2160
Total Pixels 9.01 MegaPixels
Frame Rate 12 fps
Electronic Shutter Global
Pixel Size 2.50 µm
Pixel Depth 8/10/12 bits
Pixel Formats
Mono 10
Mono 10p
Mono 12
Mono 12p
Mono 8
Frame Synchronization Free-run
Hardware trigger
Software trigger
Exposure Control Programmable via the camera API
Hardware trigger
Digital Inputs 1
General Purpose I/O (GPIO) 2
Power Input POE or 12-24 VDC
Power Consumption 3.6 Watts (4.6W POE)
Dimensions 55.5 mm x 29 mm x 29 mm
Operating Temperature 0 to 50°C
Mass 100 g
Standards Compliance RoHS, CE, IP30, GigE Vision 2.0, FCC, UL, GenICam, KC, EAC

EMVA DATA

EMVA Quantum Efficiency (typical) 50.3 %
Dark Noise 1.0 electrons
Saturation Capacity 4,400 electrons
Dynamic Range 69.2 dB
Signal-to-Noise Ratio 36.5 dB

FEATURES

Beyond Features
Compression Beyond
Pixel Beyond
Chunks
Auto Brightness Status
CRC Checksum
Counter Value
Exposure Time
Frame ID
Gain
Line Status All
Timestamp
Timestamp Value
Color Creation and Enhancement
Brightness and Contrast
Event Reporting
Action Late
Exposure End
Frame Buffer Overrun
Frame Start
Frame Trigger Missed
Overrun
Temperature Status Changed
Test
GigE Vision 2.0
Action Commands (Synchronous Triggering)
Precision Time Protocol (IEEE 1588)
Scheduled Action Commands
I/O Control
Input Filter
Serial Communication (UART)
Image Acquisition Control
Acquisition Frame Rate
Acquisition Mode
Acquisition Start, Stop, and Abort
Acquisition Status
Exposure Active Trigger
Exposure End Trigger
Exposure Start Delay
Exposure Start Trigger
Frame Active Trigger
Frame Burst Active Trigger
Frame Burst End Trigger
Frame Burst Start Trigger
Frame End Trigger
Frame Start Trigger
High Speed Burst Mode
Sensor Readout Time
Trigger Delay
Triggered by Hardware
Triggered by Software
Line Source Signals
Counter Active
Exposure Active
Frame Burst Active
Frame Burst Trigger Wait
Frame Trigger Wait
Serial Tx
Timer 1 Active, Timer 2 Active
User Output 1, 2, and 3
Miscellaneous
Device Information Parameters
Device Temperature
Periodic Signal
Sensor Bit Depth
Sensor State
Temperature State
User Sets (Configuration Sets)
User-Defined Values
PGI
Denoising
Improved Sharpness
Pixel Formats
Mono 10
Mono 10p
Mono 12
Mono 12p
Mono 8
Standard Features
Auto Function Profile
Binning
Black Level
Center X and Center Y
Counter
Digital Shift
Exposure Auto
Exposure Mode: Timed
Exposure Mode: Trigger Controlled
Exposure Mode: Trigger Width
Exposure Time
Gain
Gain Auto
Gamma Correction
Image ROI (Region of Interest)
Lookup Table (LUT)
Multiple ROI
Reverse X (Horizontal Mirroring)
Reverse Y (Vertical Mirroring)
Test Patterns
Timer

OPTICS

OPTICS PARAMETERS






 Horizontal PhotoActive Area (PAA h) 6.480 mm
Vertical PhotoActive Area (PAA v) 5.400 mm
Diagonal PhotoActive Area (PAA diag) 8.435 mm
Image Sensor Resolution 200 line pairs/mm
Rear Flange Distance 17.526 mm

 

MECHANICAL & I/O Pinout

Case Type  Metal Shielded Box
Case Size (L x W x H) 55.5 mm x 29 mm x 29 mm
Mass 105g

6-PIN M8 FEMALE CONNECTOR PINOUT

PIN DESIGNATION FUNCTION
1 – 12 VDC camera power
2 Line 1 Opto-coupled I/O input line
3 – Ground for opto-coupled I/O lines
4 Line 2 General purpose I/O (GPIO) line
5 Line 3 General purpose I/O (GPIO) line
6 – Ground for camera power and General Purpose I/O (GPIO) lines
Basler ace 2 GigE

 

Basler Ace2 GigE Mechanical Drawing (192 KB)
Shopping Cart
Scroll to Top