a2A2840-48umPRO

a2A2840-48umPRO

SONY Pregius 8 MegaPixel Monochrome Image Sensor

  • 2/3 inch Optical Format
  • 48 frames/sec
  • Global Electronic Shutter
  • Convenient & Robust M8 I/O Connector

- +
Add to quote

SPECIFICATIONS

Model a2A2840-48umPRO
Part Number 108424
Product Family ace 2 Pro
Interface USB 3.0
Image Sensor Sony IMX546
COLOR or Monochrome Monochrome
Optics Format 2/3 inch
Lens Mount C-mount
Horizontal Pixels 2840
Vertical Pixels 2840
Total Pixels 8.07 MegaPixels
Frame Rate 48 fps
Electronic Shutter Global
Pixel Size 2.74 µm
Pixel Depth 8/10/12 bits
Pixel Formats
Mono 10
Mono 10p
Mono 12
Mono 12p
Mono 8
Frame Synchronization Free-run
Hardware trigger
Software trigger
Exposure Control Programmable via the camera API
Hardware trigger
Digital Inputs 1
General Purpose I/O (GPIO) 2
Power Input via USB 3.0 Interface or 12-24VCD
Power Consumption 3.9 Watts
Dimensions 42.8 mm x 29 mm x 29 mm
Operating Temperature -10 °C to 50°C
Mass 90 g
Standards Compliance RoHS, CE, IP30, USB3 Vision, FCC, UL, GenICam, KC, EAC

EMVA DATA

EMVA Quantum Efficiency (typical) 65.3 %
Dark Noise 2.5 electrons
Saturation Capacity 9,800 electrons
Dynamic Range 70.1 dB
Signal-to-Noise Ratio 39.9 dB

FEATURES

Beyond Features
Compression Beyond
Pixel Beyond
Chunks
Auto Brightness Status
CRC Checksum
Counter Value
Exposure Time
Frame ID
Gain
Line Status All
Timestamp
Timestamp Value
Color Creation and Enhancement
Brightness and Contrast
Event Reporting
Exposure End
Frame Buffer Overrun
Frame Start
Frame Trigger Missed
Overrun
Temperature Status Changed
Test
I/O Control
Input Filter
Serial Communication (UART)
Image Acquisition Control
Acquisition Frame Rate
Acquisition Mode
Acquisition Start, Stop, and Abort
Acquisition Status
Exposure Active Trigger
Exposure End Trigger
Exposure Start Delay
Exposure Start Trigger
Frame Active Trigger
Frame Burst Active Trigger
Frame Burst End Trigger
Frame Burst Start Trigger
Frame End Trigger
Frame Start Trigger
High Speed Burst Mode
Sensor Readout Time
Trigger Delay
Triggered by Hardware
Triggered by Software
Line Source Signals
Counter Active
Exposure Active
Frame Burst Active
Frame Burst Trigger Wait
Frame Trigger Wait
Serial Tx
Timer 1 Active, Timer 2 Active
User Output 1, 2, and 3
Miscellaneous
Device Information Parameters
Device Temperature
Sensor Bit Depth
Sensor State
Temperature State
User Sets (Configuration Sets)
User-Defined Values
PGI
Denoising
Improved Sharpness
Pixel Formats
Mono 10
Mono 10p
Mono 12
Mono 12p
Mono 8
Standard Features
Auto Function Profile
Binning
Black Level
Center X and Center Y
Counter
Digital Shift
Exposure Auto
Exposure Mode: Timed
Exposure Mode: Trigger Controlled
Exposure Mode: Trigger Width
Exposure Time
Gain
Gain Auto
Gamma Correction
Image ROI (Region of Interest)
Lookup Table (LUT)
Multiple ROI
Reverse X (Horizontal Mirroring)
Reverse Y (Vertical Mirroring)
Test Patterns
Timer

OPTICS

OPTICS PARAMETERS






 Horizontal PhotoActive Area (PAA h) 7.782 mm
Vertical PhotoActive Area (PAA v) 7.782 mm
Diagonal PhotoActive Area (PAA diag) 11.005 mm
Image Sensor Resolution 183 line pairs/mm
Rear Flange Distance 17.526 mm

 

MECHANICAL & I/O Pinout

Case Type  Metal Shielded Box
Case Size (L x W x H) 42.8 mm x 29 mm x 29 mm
Mass 90g

6-PIN M8 FEMALE CONNECTOR PINOUT

PIN DESIGNATION FUNCTION
1 – Reserved. Do Not Connect.
2 Line 1 Opto-coupled I/O input line
3 – Ground for opto-coupled I/O lines
4 Line 2 General purpose I/O (GPIO) line
5 Line 3 General purpose I/O (GPIO) line
6 – Ground for General Purpose I/O (GPIO) lines
Basler ace USB3 C-Mount v02
Basler Ace2 USB3 Technical Drawing (128 KB)

 

Shopping Cart
Scroll to Top
Rochester Imaging Technology Corporation
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.