a2A2600-64umBAS

5.6 MPixel Monochrome Industrial Camera

  • 1/2 inch Optics Format

  • 64 frames/sec

  • Global Electronic Shutter

  • Convenient & Robust M8 I/O Connector

$ 569.00

SPECIFICATIONS

Model a2A2600-64umBAS
Part Number 108370
Product Family ace 2 Basic
Interface USB 3.0
Image Sensor Gpixel GMAX2505
COLOR or Monochrome Monochrome
Optics Format 1/2 inch
Lens Mount C-mount
Horizontal Pixels 2600
Vertical Pixels 2160
Total Pixels 5.62 MegaPixels
Frame Rate 64 fps
Electronic Shutter Global
Pixel Size 2.50 µm
Pixel Depth 8/10/12 bits
Frame Synchronization Free-run
Hardware trigger
Software trigger
Exposure Control Programmable via the camera API
Hardware trigger
Pixel Formats
Mono 10
Mono 10p
Mono 12
Mono 12p
Mono 8
Digital Inputs 1
General Purpose I/O (GPIO) 2
Power Input Via USB 3.0 interface
Power Consumption 3.9 Watts
Dimensions 42.8 mm x 29 mm x 29 mm
Operating Temperature -10 C to 60 C
Mass 85g
Standards Compliance RoHS, CE, IP30, FCC, UL, GenICam, USB3 Vision, KC, EAC

EMVA DATA

EMVA Quantum Efficiency (typical) 51.3 %
Dark Noise 0.8 electrons
Saturation Capacity 4,500 electrons
Dynamic Range 70.0 dB
Signal-to-Noise Ratio 36.5 dB

FEATURES

Chunks
  • Auto Brightness Status
  • CRC Checksum
  • Counter Value
  • Exposure Time
  • Frame ID
  • Gain
  • Line Status All
  • Timestamp
  • Timestamp Value
Color Creation and Enhancement
  • Brightness and Contrast
Event Reporting
  • Exposure End
  • Frame Buffer Overrun
  • Frame Start
  • Frame Trigger Missed
  • Overrun
  • Temperature Status Changed
  • Test
I/O Control
  • Input Filter
Image Acquisition Control
  • Acquisition Frame Rate
  • Acquisition Mode
  • Acquisition Start, Stop, and Abort
  • Acquisition Status
  • Exposure Active Trigger
  • Exposure End Trigger
  • Exposure Start Delay
  • Exposure Start Trigger
  • Frame Active Trigger
  • Frame Burst Active Trigger
  • Frame Burst End Trigger
  • Frame Burst Start Trigger
  • Frame End Trigger
  • Frame Start Trigger
  • High Speed Burst Mode
  • Sensor Readout Time
  • Trigger Delay
  • Triggered by Hardware
  • Triggered by Software
Line Source Signals
  • Counter Active
  • Exposure Active
  • Frame Burst Active
  • Frame Burst Trigger Wait
  • Frame Trigger Wait
  • Serial Tx
  • Timer 1 Active, Timer 2 Active
  • User Output 1, 2, and 3
Miscellaneous
  • Device Information Parameters
  • Device Temperature
  • Sensor Bit Depth
  • Sensor State
  • Temperature State
  • User Sets (Configuration Sets)
  • User-Defined Values
Pixel Formats
  • Mono 10
  • Mono 10p
  • Mono 12
  • Mono 12p
  • Mono 8
Standard Features
  • Auto Function Profile
  • Binning
  • Black Level
  • Center X and Center Y
  • Counter
  • Digital Shift
  • Exposure Auto
  • Exposure Mode: Timed
  • Exposure Mode: Trigger Controlled
  • Exposure Mode: Trigger Width
  • Exposure Time
  • Gain
  • Gain Auto
  • Gamma Correction
  • Image ROI (Region of Interest)
  • Lookup Table (LUT)
  • Multiple ROI
  • Reverse X (Horizontal Mirroring)
  • Reverse Y (Vertical Mirroring)
  • Test Patterns
  • Timer

OPTICS

OPTICS PARAMETERS






 Horizontal PhotoActive Area (PAA h) 6.500 mm
Vertical PhotoActive Area (PAA v) 5.400 mm
Diagonal PhotoActive Area (PAA diag) 8.450 mm
Image Sensor Resolution 200 line pairs/mm
Rear Flange Distance 17.526 mm

 

MECHANICAL & I/O Pinout

Case Type  Metal Shielded Box
Case Size (L x W x H) 42.8 mm x 29 mm x 29 mm
Mass 90g

6-PIN M8 FEMALE CONNECTOR PINOUT

PIN DESIGNATION FUNCTION
1 – Reserved. Do Not Connect.
2 Line 1 Opto-coupled I/O input line
3 – Ground for opto-coupled I/O lines
4 Line 2 General purpose I/O (GPIO) line
5 Line 3 General purpose I/O (GPIO) line
6 – Ground for General Purpose I/O (GPIO) lines
Basler ace USB3 C-Mount v02
Basler Ace2 USB3 Technical Drawing (128 KB)
Shopping Cart
Scroll to Top