a2A2600-20gcBAS

Gpixel 5.6 MPixel Color Image Sensor

  • 1/2 inch Optical Format

  • 20 frames.sec

  • Global Electronic Shutter

  • Convenient & Robust M8 I/O Connector

$ 579.00

SPECIFICATIONS

Model a2A2600-20gcBAS
Part Number 108367
Product Family ace 2 Basic
Interface GigE
Image Sensor Gpixel GMAX2525
COLOR or Monochrome Color
Optics Format 1/2 inch
Lens Mount C-mount
Horizontal Pixels 2600
Vertical Pixels 2160
Total Pixels 5.62 MegaPixels
Frame Rate 20 fps
Electronic Shutter Global
Pixel Size 2.50 µm
Pixel Depth 8/10/12 bits
Pixel Formats
BGR 8
Bayer GB 10
Bayer GB 10p
Bayer GB 12
Bayer GB 12p
Bayer GB 8
Mono 10
Mono 10p
Mono 12
Mono 12p
Mono 8
RGB 8
YCbCr422_8 (YUV422_8)
Frame Synchronization Free-run
Hardware trigger
Software trigger
Exposure Control Programmable via the camera API
Hardware Trigger
Digital Inputs 1
General Purpose I/O (GPIO) 2
Power Input PoE or 12-24 VDC
Power Consumption 3.6 Watts
Dimensions 55.5 mm x 29 mm x 29 mm
Operating Temperature -10 C to 60 C
Mass 100g
Standards Compliance RoHS, CE, IP30, GigE Vision 2.0, FCC, UL, GenICam, KC, EAC

EMVA DATA

EMVA Quantum Efficiency (typical) pending
Dark Noise pending
Saturation Capacity pending
Dynamic Range pending
Signal-to-Noise Ratio pending

FEATURES

Chunks
  • Auto Brightness Status
  • CRC Checksum
  • Counter Value
  • Exposure Time
  • Frame ID
  • Gain
  • Line Status All
  • Timestamp
  • Timestamp Value
Color Creation and Enhancement
  • Balance White (Manual White Balance)
  • Balance White Auto (Automatic White Balance)
  • Brightness and Contrast
  • Color Adjustment (6-axis Hue/Saturation)
  • Color Transformation
  • Hue and Saturation
Event Reporting
  • Action Late
  • Exposure End
  • Frame Buffer Overrun
  • Frame Start
  • Frame Trigger Missed
  • Overrun
  • Temperature Status Changed
  • Test
GigE Vision 2.0
  • Action Commands (Synchronous Triggering)
  • Precision Time Protocol (IEEE 1588)
  • Scheduled Action Commands
I/O Control
  • Input Filter
Image Acquisition Control
  • Acquisition Frame Rate
  • Acquisition Mode
  • Acquisition Start, Stop, and Abort
  • Acquisition Status
  • Exposure Active Trigger
  • Exposure End Trigger
  • Exposure Start Delay
  • Exposure Start Trigger
  • Frame Active Trigger
  • Frame Burst Active Trigger
  • Frame Burst End Trigger
  • Frame Burst Start Trigger
  • Frame End Trigger
  • Frame Start Trigger
  • High Speed Burst Mode
  • Sensor Readout Time
  • Trigger Delay
  • Triggered by Hardware
  • Triggered by Software
Line Source Signals
  • Counter Active
  • Exposure Active
  • Frame Burst Active
  • Frame Burst Trigger Wait
  • Frame Trigger Wait
  • Serial Tx
  • Timer 1 Active, Timer 2 Active
  • User Output 1, 2, and 3
Miscellaneous
  • Device Information Parameters
  • Device Temperature
  • Periodic Signal
  • Sensor Bit Depth
  • Sensor State
  • Temperature State
  • User Sets (Configuration Sets)
  • User-Defined Values
Pixel Formats
  • BGR 8
  • Bayer GB 10
  • Bayer GB 10p
  • Bayer GB 12
  • Bayer GB 12p
  • Bayer GB 8
  • Mono 10
  • Mono 10p
  • Mono 12
  • Mono 12p
  • Mono 8
  • RGB 8
  • YCbCr422_8 (YUV422_8)
Standard Features
  • Auto Function Profile
  • Black Level
  • Center X and Center Y
  • Counter
  • Digital Shift
  • Exposure Auto
  • Exposure Mode: Timed
  • Exposure Mode: Trigger Controlled
  • Exposure Mode: Trigger Width
  • Exposure Time
  • Gain
  • Gain Auto
  • Gamma Correction
  • Image ROI (Region of Interest)
  • Lookup Table (LUT)
  • Multiple ROI
  • Reverse X (Horizontal Mirroring)
  • Reverse Y (Vertical Mirroring)
  • Test Patterns
  • Timer

OPTICS

OPTICS PARAMETERS






 Horizontal PhotoActive Area (PAA h) 6.500 mm
Vertical PhotoActive Area (PAA v) 5.400 mm
Diagonal PhotoActive Area (PAA diag) 8.450 mm
Image Sensor Resolution 200 line pairs/mm
Rear Flange Distance 17.526 mm

 

MECHANICAL & I/O Pinout

Case Type  Metal Shielded Box
Case Size (L x W x H) 55.5 mm x 29 mm x 29 mm
Mass 100g

6-PIN M8 FEMALE CONNECTOR PINOUT

PIN DESIGNATION FUNCTION
1 – 12 VDC camera power
2 Line 1 Opto-coupled I/O input line
3 – Ground for opto-coupled I/O lines
4 Line 2 General purpose I/O (GPIO) line
5 Line 3 General purpose I/O (GPIO) line
6 – Ground for camera power and General Purpose I/O (GPIO) lines
Basler ace 2 GigE

 

Basler Ace2 GigE Mechanical Drawing (192 KB)
Shopping Cart
Scroll to Top